Search results
Results From The WOW.Com Content Network
High-Definition Multimedia Interface(HDMI) is a compact audio/video standard for transmitting uncompressed digital data. There are three HDMI connector types. Type A and Type B were defined by the HDMI 1.0 specification. Type C was defined by the HDMI 1.3 specification.
XLR connectors (mid-50s to today) Most commonly used on professional microphones, the common 3-pin XLR connector is a standard for transferring balanced audio among professional audio equipment. The 4-pin XLR is the standard connector for intercom headsets, such as systems made by Clear-Com and Telex. Two pins are used for the mono headphone ...
Phone connector (audio) Phone plug mated in a phone socket. The plug's grooved tip is held firmly by the socket's spring tip contact. When not mated, this spring instead connects to the flat switch contact for detecting a plug. A phone connector is a family of cylindrically -shaped electrical connectors primarily for analog audio signals.
Audio feedback (also known as acoustic feedback, simply as feedback) is a positive feedback situation that may occur when an acoustic path exists between an audio output (for example, a loudspeaker) and its audio input (for example, a microphone or guitar pickup ). In this example, a signal received by the microphone is amplified and passed out ...
An audio engineer adjusts a mixer while doing live sound for a band. A mixing console or mixing desk is an electronic device for mixing audio signals, used in sound recording and reproduction and sound reinforcement systems. Inputs to the console include microphones, signals from electric or electronic instruments, or recorded sounds.
The Bluetooth protocol RFCOMM is a simple set of transport protocols, made on top of the L2CAP protocol, providing emulated RS-232 serial ports (up to sixty simultaneous connections to a Bluetooth device at a time). The protocol is based on the ETSI standard TS 07.10. RFCOMM is sometimes called serial port emulation.
An audio interface is a piece of computer hardware that allows the input and output of audio signals to and from a host computer or recording device. Audio interfaces are closely related to computer sound cards, but whereas sound cards are optimized for audio playback an audio interface is primarily intended to provide low-latency analog-to ...
In the field of acoustics, a diaphragm is a transducer intended to inter-convert mechanical vibrations to sounds, or vice versa. It is commonly constructed of a thin membrane or sheet of various materials, suspended at its edges. The varying air pressure of sound waves imparts mechanical vibrations to the diaphragm which can then be converted ...