Search results
Results From The WOW.Com Content Network
XLR connectors (mid-50s to today) Most commonly used on professional microphones, the common 3-pin XLR connector is a standard for transferring balanced audio among professional audio equipment. The 4-pin XLR is the standard connector for intercom headsets, such as systems made by Clear-Com and Telex. Two pins are used for the mono headphone ...
XLR3 cable connectors female (left) and male. The XLR connector is a type of electrical connector primarily used in professional audio, video, and stage lighting equipment. XLR connectors are cylindrical, with three to seven connector pins, and are often employed for analog balanced audio interconnections, AES3 digital audio, portable intercom, DMX512 lighting control, and for low-voltage ...
Microphone. Shure Brothers microphone, model 55S, multi-impedance "Small Unidyne" dynamic from 1951. A microphone, colloquially called a mic (/ maɪk /), [1] or mike, [a] is a transducer that converts sound into an electrical signal.
Phone connector (audio) Phone plug mated in a phone socket. The plug's grooved tip is held firmly by the socket's spring tip contact. When not mated, this spring instead connects to the flat switch contact for detecting a plug. A phone connector is a family of cylindrically -shaped electrical connectors primarily for analog audio signals.
An electret microphone is a microphone whose diaphragm forms a capacitor (historically-termed a condenser) that incorporates an electret. The electret's permanent electric dipole provides a constant charge Q on the capacitor. Sound waves move the diaphragm, changing the capacitance C, which produces a corresponding voltage change across the ...
A boundary microphone (or pressure zone microphone) is one or more small omnidirectional or cardioid condenser mic capsule (s) positioned near or flush with a boundary (surface) such as a floor, table, or wall. The capsule (s) are typically mounted in a flat plate or housing. The arrangement provides a directional half-space pickup pattern ...
The transient generated when a microphone is hot-plugged into an input with active phantom power can damage the microphone and possibly the preamp circuit of the input [10] because not all pins of the microphone connector make contact at the same time, and there is an instant when current can flow to charge the capacitance of the cable from one ...
Singer Cody Simpson using a wireless microphone headset in a 2013 concert in Montreal. A wireless microphone, or cordless microphone, is a microphone without a physical cable connecting it directly to the sound recording or amplifying equipment with which it is associated. Also known as a radio microphone, it has a small, battery-powered radio ...