Search results
Results From The WOW.Com Content Network
In engineering, a foundation is the element of a structure which connects it to the ground or more rarely, water (as with floating structures ), transferring loads from the structure to the ground. Foundations are generally considered either shallow or deep. [ 1] Foundation engineering is the application of soil mechanics and rock mechanics ...
A concrete slab is a common structural element of modern buildings, consisting of a flat, horizontal surface made of cast concrete. Steel- reinforced slabs, typically between 100 and 500 mm thick, are most often used to construct floors and ceilings, while thinner mud slabs may be used for exterior paving ( see below ). [ 1][ 2] In many ...
Waffle slab foundations adhere to International Building Code requirements. By 2008, most states put into effect the changes adopted in the 2006 IBC and, in regards to foundations, the on-grade mat foundation has become a more attractive design because, as an engineered system, it already accommodates the 2008 design recommendations, and required no major modifications to bring it into compliance.
Deep foundation. A deep foundation installation for a bridge in Napa, California, United States. Pile driving operations in the Port of Tampa, Florida. A deep foundation is a type of foundation that transfers building loads to the earth farther down from the surface than a shallow foundation does to a subsurface layer or a range of depths.
Grade beam. A grade beam or grade beam footing is a component of a building's foundation. It consists of a reinforced concrete beam that transmits the load from a bearing wall into spaced foundations such as pile caps or caissons. [1] It is used in conditions where the surface soil’s load-bearing capacity is less than the anticipated design ...
Tensile strength (σt) Stronger than concrete. Reinforced concrete, also called ferroconcrete, is a composite material in which concrete 's relatively low tensile strength and ductility are compensated for by the inclusion of reinforcement having higher tensile strength or ductility.
Underpinning. In construction or renovation, underpinning is the process of strengthening the foundation of an existing building or other structure. Underpinning may be necessary for a variety of reasons: The original foundation isn't strong or stable enough. The usage of the structure has changed. The properties of the soil supporting the ...
Shallow foundation. A shallow foundation is a type of building foundation that transfers structural load to the Earth very near to the surface, rather than to a subsurface layer or a range of depths, as does a deep foundation. Customarily, a shallow foundation is considered as such when the width of the entire foundation is greater than its ...