Search results
Results From The WOW.Com Content Network
The KM250 is powered by the 180 hp KK-7.4 diesel engine. The truck is capable of cruising at 95 km/h with torque generation recorded to as much as 490Nm. Weighing 6.1 tonnes, the truck, designed with 6x6 configuration, is equipped with a fuel tank, with a capacity of 200 litres of fuel. The 200-litre tank capacity replaces the payload ...
M88 recovery vehicle. An original baseline M88 ( Bergepanzer 1) ARV of the German Army on static display at the German Tank Museum outside Munster, Germany. The M88 recovery vehicle is one of the largest armored recovery vehicles (ARV) in use by United States Armed Forces. There are three variants, the M88, the M88A1, and the M88A2 HERCULES ...
The Medium Tactical Vehicle Replacement (MTVR) is a series of vehicles used by the U.S. Marines. [1] [9] The first MTVRs were delivered in late 1999.The MTVR is the equivalent of the U.S. Army's Family of Medium Tactical Vehicles (FMTV); the Marines do not use the FMTV (with the exception of the FMTV-based HIMARS) and the Army does not use the MTVR.
It takes the diesel engine of the JLTV about 30 minutes to charge the lithium-ion battery, and then the eJLTV can operate off of battery power for approximately the same amount of time. It can export up to 115 kW of power. The hybrid electric configuration adds more than 453 kg to the vehicle's curb weight. Light Reconnaissance Vehicle
The Heavy Expanded Mobility Tactical Truck (HEMTT) is an eight-wheel drive, diesel-powered, 10-short-ton (9,100 kg) tactical truck. [2] The M977 HEMTT first entered service in 1982 with the United States Army as a replacement for the M520 Goer, and since that date has remained in production for the U.S. Army and other nations.
The AC6000CW was designed at the height of a horsepower race between the two major locomotive manufacturers, Electro-Motive Division of La Grange, Illinois with the SD90MAC, and GE Transportation of Erie, Pennsylvania with the AC6000CW, in the early to mid 1990s. The goal was 6,000 horsepower (4,500 kW). GE worked with Deutz-MWM of Germany in ...
Side mounting is the most common placement of diesel tanks for trucks. This is typically accomplished with the use of brackets, straps or a combination of both for the purpose of attaching the fuel tank to the truck frame. The choice of shape is generally influenced by the need for maximum fuel capacity and the desire for a stylish look.
The M915A2 had a 775 cu in (12.7 L) Detroit Diesel Series 60 DDEC II developing 400 hp (300 kW) at 2100rpm and 1,400 lbf⋅ft (1,898 N⋅m) of torque at 1200rpm. Both are turbocharged inline 6 cylinder 4-stroke diesel engine, both engines are intercooled. The Cummins uses a water to air after-cooler while the Series 60 uses an air to air after ...