Search results
Results From The WOW.Com Content Network
The tested SWH system had about 20% of the impact of an electrical water heater and half that of a gas water heater. [ 50 ] Analysing their lower impact retrofit freeze-tolerant solar water heating system, Allen et al. (qv) reported a production CO 2 impact of 337 kg, which is around half the environmental impact reported in the Ardente et al ...
Operating temperature. An operating temperature is the allowable temperature range of the local ambient environment at which an electrical or mechanical device operates. The device will operate effectively within a specified temperature range which varies based on the device function and application context, and ranges from the minimum ...
Water heating is a heat transfer process that uses an energy source to heat water above its initial temperature. Typical domestic uses of hot water include cooking, cleaning, bathing, and space heating. In industry, hot water and water heated to steam have many uses. Domestically, water is traditionally heated in vessels known as water heaters ...
An air source heat pump ( ASHP) is a heat pump that can absorb heat from air outside a building and release it inside; it uses the same vapor-compression refrigeration process and much the same equipment as an air conditioner, but in the opposite direction. ASHPs are the most common type of heat pump and, usually being smaller, tend to be used ...
Solar thermal energy. Roof-mounted close-coupled thermosiphon solar water heater. The first three units of Solnova in the foreground, with the two towers of the PS10 and PS20 solar power stations in the background. Solar thermal energy ( STE) is a form of energy and a technology for harnessing solar energy to generate thermal energy for use in ...
Thermistor. A thermistor is a semiconductor type of resistor whose resistance is strongly dependent on temperature, more so than in standard resistors. The word thermistor is a portmanteau of thermal and resistor . Thermistors are categorized based on their conduction models. Negative-temperature-coefficient (NTC) thermistors have less ...
Thermoelectric cooling. Thermoelectric cooling uses the Peltier effect to create a heat flux at the junction of two different types of materials. A Peltier cooler, heater, or thermoelectric heat pump is a solid-state active heat pump which transfers heat from one side of the device to the other, with consumption of electrical energy, depending ...
Thermosiphon. Thermosiphon (or thermosyphon) is a method of passive heat exchange, based on natural convection, which circulates a fluid without the necessity of a mechanical pump. Thermosiphoning is used for circulation of liquids and volatile gases in heating and cooling applications such as heat pumps, water heaters, boilers and furnaces ...