Search results
Results From The WOW.Com Content Network
The International K and KB series are trucks that were produced by International Harvester, the first being the K introduced in mid 1940. In total there were 42 models, 142 different wheelbase lengths and load ratings ranging from 1/2 ton to 90,000 lbs. [ 1] They are best known for their durability, prewar design in a postwar era, and low price ...
The center pulley is the crankshaft, the lower left one the seawater pump, the upper right one the alternator. The Yanmar 2GM20 is a series of inboard marine diesel engines manufactured by the Japanese company Yanmar Co. Ltd. It is used in a wide range of sailboats and motorboats. The 2GM20 is out of production and has been superseded by the ...
The International Harvester Company (IHC) has been building its own proprietary truck engines since the introduction of their first truck in 1907. International tended to use proprietary diesel engines. In the 1970s, IHC built the DVT 573 V-8 diesel of 240 and 260 hp (179 and 194 kW) but these were not highly regarded and relatively few were sold.
The AC6000CW was designed at the height of a horsepower race between the two major locomotive manufacturers, Electro-Motive Division of La Grange, Illinois with the SD90MAC, and GE Transportation of Erie, Pennsylvania with the AC6000CW, in the early to mid 1990s. The goal was 6,000 horsepower (4,500 kW). GE worked with Deutz-MWM of Germany in ...
6.2L fitted to a 1987 HMMWV. The original 6.2 L (379 cu in) diesel V8 was introduced in 1982 for the Chevrolet C/K and was produced until 1993. The 6.2L diesel emerged as a high-fuel-economy alternative to the V8 gasoline engine lineup, and achieved better mileage than Chevrolet's 4.3L V6 gasoline engine of the 1980s, at a time when the market was focused on power rather than efficiency.
Create a buffer zone. To separate your sleep area from the rest of the apartment, you could get a freestanding screen, room divider or “floating" (hanging) wall. And as much as you can, keep ...
Damper (flow) Opposed blade dampers in a mixing duct. A damper is a valve or plate that stops or regulates the flow of air inside a duct, chimney, VAV box, air handler, or other air-handling equipment. A damper may be used to cut off central air conditioning (heating or cooling) to an unused room, or to regulate it for room-by-room temperature ...
The M88A1 was powered by the Continental AVDS-1790-2DR Diesel engine and had a 10 HP Diesel auxiliary power unit. [1] While the original M88 and M88A1 are designated as a "medium recovery vehicle", the M88A2, original designation being M88A1E1, is designated as "heavy recovery vehicle". They are all similar in many fundamental ways.