Search results
Results From The WOW.Com Content Network
The Bluetooth protocol RFCOMM is a simple set of transport protocols, made on top of the L2CAP protocol, providing emulated RS-232 serial ports (up to sixty simultaneous connections to a Bluetooth device at a time). The protocol is based on the ETSI standard TS 07.10. RFCOMM is sometimes called serial port emulation.
Bluetooth Low Energy ( Bluetooth LE, colloquially BLE, formerly marketed as Bluetooth Smart[ 1]) is a wireless personal area network technology designed and marketed by the Bluetooth Special Interest Group (Bluetooth SIG) [ 2] aimed at novel applications in the healthcare, fitness, beacons, [ 3] security, and home entertainment industries. [ 4]
Description. The Commodore 1351 is similar in appearance to the mouse supplied with Amiga computers of the time, but the two are not mutually compatible. In its default mode, it is a true proportional mouse, but by holding down the right mouse button when powering up the machine, it can be made to emulate its predecessor, the 1350 (which while ...
Bluetooth is a short-range wireless technology standard that is used for exchanging data between fixed and mobile devices over short distances and building personal area networks (PANs). In the most widely used mode, transmission power is limited to 2.5 milliwatts, giving it a very short range of up to 10 metres (33 ft).
lwBT is an open source lightweight Bluetooth protocol stack for embedded systems by blue-machines. It acts as a network interface for the lwIP protocol stack. It supports some Bluetooth protocols and layers, such as the H4 and BCSP UART layers. Supported higher layers include: HCI, L2CAP, SDP, BNEP, RFCOMM and PPP .
Pairing, sometimes known as bonding, is a process used in computer networking that helps set up an initial linkage between computing devices to allow communications between them. The most common example is used in Bluetooth , where the pairing process is used to link devices like a Bluetooth headset with a mobile phone .
Grab also has a tool that uses real-time information and past data to guide drivers to locations where there’s high demand, which Kandal describes as a value-added service compared to other ride ...
The air traffic control radar beacon system ( ATCRBS) is a system used in air traffic control (ATC) to enhance surveillance radar monitoring and separation of air traffic. It consists of a rotating ground antenna and transponders in aircraft. The ground antenna sweeps a narrow vertical beam of microwaves around the airspace.