Search results
Results From The WOW.Com Content Network
Mass concentration, g/ (100 ml) at 15.56 °C. Density relative to 4 °C water. Density at 20 °C relative to 20 °C water. Density at 25 °C relative to 25 °C water. Freezing temperature, °C. 10 °C. 20 °C. 25 °C.
In a piston engine, the static compression ratio ( ) is the ratio between the volume of the cylinder and combustion chamber when the piston is at the bottom of its stroke, and the volume of the combustion chamber when the piston is at the top of its stroke. [ 9] It is therefore calculated by the formula [ 10] where. is the displacement volume.
In small two-stroke engines, the oil may be pre-mixed with the gasoline or fuel, often in a rich gasoline: oil ratio of 25:1, 40:1 or 50:1, and burned in use along with the gasoline. Larger two-stroke engines used in boats and motorcycles may have a more economical oil injection system rather than oil pre-mixed into the gasoline.
The "dilution factor" is an expression which describes the ratio of the aliquot volume to the final volume. Dilution factor is a notation often used in commercial assays. For example, in solution with a 1/5 dilution factor (which may be abbreviated as x5 dilution ), entails combining 1 unit volume of solute (the material to be diluted) with ...
1.58 76.8 4.88 –22.8 –29.8 K b & K f [1] Chloroform: 1.48 61.2 3.88 –63.5 –4.90 K b & K f [1] Cyclohexane: 80.74 2.79 6.55 –20.2 Diethyl ether: 0.713 34.5 2.16 –193.58 –1.79 K b & K f [1] Methanol [4] 0.79 64.7 Ethanol: 0.78 78.4 1.22 –114.6 –1.99 K b [2] Ethylene bromide: 2.18 133 6.43 9.974 –12.5 K b & K f [1] Ethylene ...
Air–fuel equivalence ratio ( λ) Air–fuel equivalence ratio, λ (lambda), is the ratio of actual AFR to stoichiometry for a given mixture. λ = 1.0 is at stoichiometry, rich mixtures λ < 1.0, and lean mixtures λ > 1.0. There is a direct relationship between λ and AFR. To calculate AFR from a given λ, multiply the measured λ by the ...
Azeotrope tables. This page contains tables of azeotrope data for various binary and ternary mixtures of solvents. The data include the composition of a mixture by weight (in binary azeotropes, when only one fraction is given, it is the fraction of the second component), the boiling point ( b.p.) of a component, the boiling point of a mixture ...
Viscosity models for mixtures. The shear viscosity (or viscosity, in short) of a fluid is a material property that describes the friction between internal neighboring fluid surfaces (or sheets) flowing with different fluid velocities. This friction is the effect of (linear) momentum exchange caused by molecules with sufficient energy to move ...