Search results
Results From The WOW.Com Content Network
Four-stroke cycle used in gasoline/petrol engines: intake (1), compression (2), power (3), and exhaust (4). The right blue side is the intake port and the left brown side is the exhaust port. The cylinder wall is a thin sleeve surrounding the piston head which creates a space for the combustion of fuel and the genesis of mechanical energy.
The M4+2 engine has a four-stroke piston and a two-stroke piston. The shaft of the four-stroke piston rotates twice as fast as the shaft of the two-stroke piston, and the two-stroke part always runs at half speed. This ensures that both parts work optimally regarding fuel consumption at all times. The same principles apply to having two ...
Thermodynamics. In engineering, the Miller cycle is a thermodynamic cycle used in a type of internal combustion engine. The Miller cycle was patented by Ralph Miller, an American engineer, U.S. patent 2,817,322 dated Dec 24, 1957. The engine may be two- or four-stroke and may be run on diesel fuel, gases, or dual fuel. [ 1]
The first implementation of the Atkinson cycle was in 1882; unlike later versions, it was arranged as an opposed-piston engine, the Atkinson differential engine. [6] [7] In this, a single crankshaft was connected to two opposed pistons through a toggle-jointed linkage that had a nonlinearity; for half a revolution, one piston remained almost stationary while the other approached it and ...
The Bourke engine was an attempt by Russell Bourke, in the 1920s, to improve the two-stroke internal combustion engine. Despite finishing his design and building several working engines, the onset of World War II, lack of test results, [ 1] and the poor health of his wife compounded to prevent his engine from ever coming successfully to market.
The first person to build a working four-stroke engine, a stationary engine using a coal gas-air mixture for fuel (a gas engine), was German engineer Nicolaus Otto. [4] This is why the four-stroke principle today is commonly known as the Otto cycle and four-stroke engines using spark plugs often are called Otto engines.
The Wankel cycle. The "A" marks one of the three apexes of the rotor. The "B" marks the eccentric shaft, turning three times for every revolution of the rotor. edit 1: without jittering. This animation does an excellent job in explaining how the Wankel engine works. I would not have been able to understand the engine without the aid of this ...
A straight-four engine (also referred to as an inline-four engine) is a four-cylinder piston engine where cylinders are arranged in a line along a common crankshaft. The majority of automotive four-cylinder engines use a straight-four layout [ 1 ] : pp. 13–16 (with the exceptions of the flat-four engines produced by Subaru and Porsche) [ 2 ...