Search results
Results From The WOW.Com Content Network
The Q-code is a standardised collection of three-letter codes that each start with the letter "Q". It is an operating signal initially developed for commercial radiotelegraph communication and later adopted by other radio services, especially amateur radio. To distinguish the use of a Q-code transmitted as a question from the same Q-code ...
ACP-131 [1] is the controlling publication for the listing of Q codes and Z codes. It is published and revised from time to time by the Combined Communications Electronics Board (CCEB) countries: Australia, New Zealand, Canada, United Kingdom, and United States. When the meanings of the codes contained in ACP-131 are translated into various ...
The QSA code and QRK code are interrelated and complementary signal reporting codes for use in wireless telegraphy . They replaced the earlier QSJ code. They replaced the earlier QSJ code. Currently, the QSA and QRK codes are officially defined in the ITU Radio Regulations 1990, Appendix 13: Miscellaneous Abbreviations and Signals to Be Used in ...
Voice procedure communications are intended to maximize clarity of spoken communication and reduce errors in the verbal message by use of an accepted nomenclature. It consists of a signalling protocol such as the use of abbreviated codes like the CB radio ten-code, Q codes in amateur radio and aviation, police codes, etc., and jargon.
The QSK code is one of the earliest signal reporting formats and is a part of the Q code used for commercial radiotelegraph communication, appearing as one of the twelve Q Codes listed in the 1912 International Radiotelegraph Convention Regulations, and was later adopted by other radio services, especially amateur radio. The QSA code was ...
The unit also features a removable button facepanel as an additional anti-theft measure. Many car audio systems (car radios) have a so-called 'radio code' number which needs to be entered after a power disconnection. This was introduced as a measure to deter theft of these devices. If the code is entered correctly, the radio is activated for use.
Operating signals are a type of brevity code used in operational communication among radio and telegraph operators. For example: Prosigns for Morse code. 92 Code: telegraph brevity codes. Q code: initially developed for commercial radiotelegraph communication and adopted by other radio services. QN Signals: published by the ARRL and used in ...
There are 24 possible 2-letter prefixes and 240 2-letter/1-number prefixes available to Canadian operators based on the ITU blocks (CF–CK, CY–CZ, VA–VG, VO, VX–VY and XJ–XO). There are potentially approximately 4,340,000 call signs available in Canada. Of these prefixes, 5 are currently assigned (CY, VA, VE, VO, and VY) for normal ...