Search results
Results From The WOW.Com Content Network
Gust lock on a rudder. A gust lock on an aircraft is a mechanism that locks control surfaces and keeps open aircraft doors in place while the aircraft is parked on the ground and non-operational. Gust locks prevent wind from causing unexpected movements of the control surfaces and their linked controls inside the aircraft, as well as aircraft ...
Pneumatic rack and pinion actuators for valve controls of water pipes. A pneumatic actuator mainly consists of a piston or a diaphragm which develops the motive power. It keeps the air in the upper portion of the cylinder, allowing air pressure to force the diaphragm or piston to move the valve stem or rotate the valve control element.
Valve actuator. Electric actuator (blue cylinder) on a valve in a power plant. A black handwheel is visible on the actuator, which allows manual positioning of the valve. The blue valve body is visible in-line with the pipe. The valve actuator opens or closes the butterfly disc of the valve based on electrical signals sent to the actuator.
Modulating control valves each with 4-20mA I to P converter linked to pneumatic a valve positioner controlling a diaphragm actuator. An air-operated valve, also known as a pneumatic valve, is a type of power-operated pipe valve that uses air pressure to perform a function similar to a solenoid. As air pressure is increased, the compressed air ...
An F-14 Tomcat descends to make an arresting gear landing on the flight deck of USS Theodore Roosevelt (CVN-71) in 2002. An arresting gear, or arrestor gear, is a mechanical system used to rapidly decelerate an aircraft as it lands. Arresting gear on aircraft carriers is an essential component of naval aviation, and it is most commonly used on ...
Air muscle contracting and extending. Pneumatic artificial muscles ( PAMs) are contractile or extensional devices operated by pressurized air filling a pneumatic bladder. In an approximation of human muscles, PAMs are usually grouped in pairs: one agonist and one antagonist . PAMs were first developed (under the name of McKibben Artificial ...
Throttle body with integrated motor actuator. Electronic throttle control ( ETC) is an automobile technology that uses electronics to replace the traditional mechanical linkages between the driver's input such as a foot pedal to the vehicle's throttle mechanism which regulates speed or acceleration. This concept is often called drive by wire ...
Pneumatic field actuators are still widely used because of the advantages of pneumatic energy for control valves in process plant environments. Showing the evolution of analog control loop signaling from the pneumatic to the electronic eras Current loops used for sensing and control signals. A modern electronic "smart" valve positioner is shown ...