Search results
Results From The WOW.Com Content Network
For simpler measurements in a temperature range from 0 to 100 °C, where water is heated up and flow or over the sample. If linear coefficients of expansion of a metal is to be measured, hot water will run through a pipe made from the metal. The pipe warms up to the temperature of the water and the relative expansion can be determined as a ...
Differential scanning calorimetry ( DSC) is a thermoanalytical technique in which the difference in the amount of heat required to increase the temperature of a sample and reference is measured as a function of temperature. [ 1] Both the sample and reference are maintained at nearly the same temperature throughout the experiment.
Thermodynamic pump testing is a form of pump testing where only the temperature rise, power consumed, and differential pressure need to be measured to find the efficiency of a pump. These measurements are typically made with insertion temperature probes and pressure probes fitted to tapping points on the pump's inlet and outlet. [1]
P water S = Partial pressure of water in saturated air (that is, at 100% relative humidity; in this case the partial pressure is equal to the vapour pressure, which can be determined as a function of ambient temperature) P water B = Partial pressure of water in saturated air in 37 °C = 47 mmHg; T S = Standard temperature in kelvins (K) = 273 K
A medical/clinical thermometer showing the temperature of 38.7 °C (101.7 °F) Temperature measurement (also known as thermometry) describes the process of measuring a current temperature for immediate or later evaluation. Datasets consisting of repeated standardized measurements can be used to assess temperature trends.
The thermal boundary layer thickness is customarily defined as the point in the boundary layer, , where the temperature reaches 99% of the free stream value : such that = 0.99. at a position along the wall. In a real fluid, this quantity can be estimated by measuring the temperature profile at a position along the wall.
Thermography. Thermogram of a traditional building in the background and a "passive house" in the foreground. Infrared thermography ( IRT ), thermal video and/or thermal imaging, is a process where a thermal camera captures and creates an image of an object by using infrared radiation emitted from the object in a process, which are examples of ...
Thermistor. A thermistor is a semiconductor type of resistor whose resistance is strongly dependent on temperature, more so than in standard resistors. The word thermistor is a portmanteau of thermal and resistor . Thermistors are categorized based on their conduction models. Negative-temperature-coefficient (NTC) thermistors have less ...