Search results
Results From The WOW.Com Content Network
For broader coverage of this topic, see USB. This article provides information about the communications aspects of Universal Serial Bus ( USB ): Signaling, Protocols, Transactions. USB is an industry-standard used to specify cables, connectors, and protocols that are used for communication between electronic devices.
This is a principle of backward compatibility. The Standard-A plug is used for connecting to a computer port, at the host side. A USB 3.0 Standard-B receptacle accepts either a USB 3.0 Standard-B plug or a USB 2.0 Standard-B plug. Backward compatibility applies to connecting a USB 2.0 Standard-B plug into a USB 3.0 Standard-B receptacle.
A USB cable, by definition, has a plug on each end—one A (or C) and one B (or C)—and the corresponding receptacle is usually on a computer or electronic device. The mini and micro formats may connect to an AB receptacle, which accepts either an A or a B plug, that plug determining the behavior of the receptacle.
The USB Implementers Forum ( USB-IF) is a nonprofit organization created to promote and maintain USB (Universal Serial Bus), a set of specifications and transmission procedures for a type of cable connection that has since become used widely for electronic equipment. Its main activities are currently the promotion and marketing of USB, Wireless ...
Serial port, parallel port, game port, Apple Desktop Bus, PS/2 port, and FireWire (IEEE 1394) Universal Serial Bus ( USB) is an industry standard that allows data exchange and delivery of power between many types of electronics. It specifies its architecture, in particular its physical interface, and communication protocols for data transfer ...
The USB HID class describes devices used with nearly every modern computer. Many predefined functions exist in the USB HID class. These functions allow hardware manufacturers to design a product to USB HID class specifications and expect it to work with any software that also meets these specifications. The same HID protocol is used unmodified ...
Ethernet over USB is the use of a USB link as a part of an Ethernet network, resulting in an Ethernet connection over USB (instead of e.g. PCI or PCIe).. USB over Ethernet (also called USB over Network or USB over IP) is a system to share USB-based devices over Ethernet, Wi-Fi, or the Internet, allowing access to devices over a network.
A single Thunderbolt 3 or later port provides data transfer, support for two 4K 60 Hz displays, and quick notebook charging up to 100W with a single cable. Any Thunderbolt or USB dock can connect to a Thunderbolt 3 computer. USB devices can be connected to a Thunderbolt 3 or later port. DisplayPort and Mini DisplayPort devices are supported.