Search results
Results From The WOW.Com Content Network
Police code. A police code is a brevity code, usually numerical or alphanumerical, used to transmit information between law enforcement over police radio systems in the United States. Examples of police codes include "10 codes" (such as 10-4 for "okay" or "acknowledged"—sometimes written X4 or X-4), signals, incident codes, response codes, or ...
10-7 Out of service. Out of service (Give location and/or telephone number) Out of Service Out at ... Out of Service 10-7 A — Not Available 10-7 B Off Radio 10-8 In service. In Service Clear In Service 10-9 Repeat, conditions bad. Repeat Say Again 10-10 Out of service—subject to call. On minor detail, subject to call Fight in progress ...
In an FM two-way radio system, CTCSS encoder levels are usually set for 15% of system deviation. For example, in a 5 kHz deviation system, the CTCSS tone level would normally be set to 750 Hz deviation. Engineered systems may call for different level settings in the 500 Hz to 1 kHz (10–20%) range.
Letter beacon. Signal of letter beacon D on 5137.5 kHz. Letter beacons are radio transmissions of uncertain origin and unknown purpose, consisting of only a single repeating Morse code letter. They have been classified into a number of groups according to transmission code and frequency, and it is supposed that the source for most of them is ...
United States. [] In the United States, response codes are used to describe a mode of response for an emergency unit responding to a call. They generally vary but often have three basic tiers: Code 3: Respond to the call using lights and sirens. Code 2: Respond to the call with emergency lights, but without sirens.
1993: split to create 905. 2001: overlaid by 647. 2013: overlaid by 437. 2025: overlaid by 942. area code 387 is reserved as a fifth code for the region. 417. Missouri (Springfield, Joplin, Branson, Lamar, Lebanon, and most of southwestern Missouri) 1950. created from parts of the area codes 314 and 816.
Pulse code cab signals work by sending metered pulses along an existing AC track circuit operating at a chosen carrier frequency. The pulses are detected via induction by a sensor hanging a few inches above the rail before the leading set of wheels. The codes are measured in pulses per minute and for the 4-aspect PRR system are set at 180 ppm ...
Reception varies by region—reasonably good night reception, but few transmitters in this band target North America. According to the WRC-03 Decisions on HF broadcasting, [2] in International Telecommunication Union regions 1 and 3, the segment 7.1–7.2 MHz is reserved for amateur radio use and there are no new broadcasting allocations in this portion of the band. 7.35–7.4 MHz is newly ...