Net Deals Web Search

Search results

1. Results From The WOW.Com Content Network

2. Ackermann steering geometry - Wikipedia

   en.wikipedia.org/wiki/Ackermann_steering_geometry

   Ackermann geometry. The Ackermann steering geometry is a geometric arrangement of linkages in the steering of a car or other vehicle designed to solve the problem of wheels on the inside and outside of a turn needing to trace out circles of different radii . It was invented by the German carriage builder Georg Lankensperger in Munich in 1816 ...

3. Bump steer - Wikipedia

   en.wikipedia.org/wiki/Bump_steer

   Bump steer. Bump steer is the term for the tendency of the wheel of a car to steer itself as it moves through the suspension stroke. Bump steer causes a vehicle to turn itself when one wheel hits a bump or falls down into a hole or rut. Excessive bump steer increases tire wear and makes the vehicle more difficult to handle on rough roads.

4. Steering knuckle - Wikipedia

   en.wikipedia.org/wiki/Steering_knuckle

   Steering knuckle. In automotive suspension, a steering knuckle or upright is that part which contains the wheel hub or spindle, and attaches to the suspension and steering components. [1] The terms spindle and hub are sometimes used interchangeably with steering knuckle, but refer to different parts. The wheel and tire assembly attach to the ...

5. Steering linkage - Wikipedia

   en.wikipedia.org/wiki/Steering_linkage

   A steering linkage is the part of an automotive steering system that connects to the front wheels. [1] The steering linkage which connects the steering gearbox to the front wheels consists of a number of rods. These rods are connected with a socket arrangement similar to a ball joint, called a tie rod end, allowing the linkage to move back and ...

6. Steering column - Wikipedia

   en.wikipedia.org/wiki/Steering_column

   Collapsible column. A common device to enhance car safety is the collapsible steering column. This is designed to collapse in the event of a collision to protect the driver from harm. The column can collapse after impact with a tolerance ring inserted between the inner shaft of the steering column and the external housing.

7. Kingpin (automotive part) - Wikipedia

   en.wikipedia.org/wiki/Kingpin_(automotive_part)

   Kingpin (automotive part) The steering kingpin is held in place by the forked ends of a beam axle on a Ford Model T. The kingpin (also king-pin, king pin and k pin) [1] [2] is the main pivot in the steering mechanism of a car or other vehicle . The term is also used to refer to part of a fifth wheel coupling apparatus for a semi and its trailer ...