Search results
Results From The WOW.Com Content Network
It is heated at the left, e.g., by a propane flame and heat is released to ambient temperature by a heat exchanger. If the temperature at the left side is high enough, the system starts to produces a loud sound. Thermoacoustic engines still suffer from some limitations, including that: The device usually has low power-to-volume ratio.
Operating temperature. An operating temperature is the allowable temperature range of the local ambient environment at which an electrical or mechanical device operates. The device will operate effectively within a specified temperature range which varies based on the device function and application context, and ranges from the minimum ...
In electronics, noise is an unwanted disturbance in an electrical signal. [ 1]: 5. Noise generated by electronic devices varies greatly as it is produced by several different effects. In particular, noise is inherent in physics and central to thermodynamics. Any conductor with electrical resistance will generate thermal noise inherently.
Noise floor. Measurement from a spectrum analyzer showing a noise-like measurement from an unspecified component. In signal theory, the noise floor is the measure of the signal created from the sum of all the noise sources and unwanted signals within a measurement system, where noise is defined as any signal other than the one being monitored.
Dynamic range (abbreviated DR, DNR, [ 1] or DYR[ 2]) is the ratio between the largest and smallest values that a certain quantity can assume. It is often used in the context of signals, like sound and light. It is measured either as a ratio or as a base-10 ( decibel) or base-2 (doublings, bits or stops) logarithmic value of the ratio between ...
The plots at the bottom show the signal intensity in the indicated row of the image (red: original signal, blue: with noise). Signal-to-noise ratio ( SNR or S/N) is a measure used in science and engineering that compares the level of a desired signal to the level of background noise. SNR is defined as the ratio of signal power to noise power ...
Thermal management (electronics) 60×60×10 mm straight-finned heat sink with a thermal profile and swirling animated forced convection flow trajectories from a tubeaxial fan, predicted using a CFD analysis package. Free convection thermoelectric cooler (Peltier cooler) with heat sink surface temperature contours, and rising warmer air and ...
In balanced audio systems, there are equal and opposite signals (difference-mode) in inputs, and any interference imposed on both leads will be subtracted, canceling out that interference (i.e., the common-mode). CMRR is a measure of a system's ability to ignore such interference and especially hum at its input.