Search results
Results From The WOW.Com Content Network
Mercedes-Benz M276. The Mercedes-Benz M272 engine is an automobile piston V6 engine family used in the 2000s (decade). Introduced in 2004, it is based on the M112 V6 introduced in 1998. All M272 engines have aluminum engine blocks with a 90° V-angle with silicon/aluminum lined cylinders. The aluminum DOHC cylinder heads have 4 valves per cylinder.
Ethanol fuel mixtures have "E" numbers which describe the percentage of ethanol fuel in the mixture by volume, for example, E85 is 85% anhydrous ethanol and 15% gasoline. Low-ethanol blends are typically from E5 to E25, although internationally the most common use of the term refers to the E10 blend. Blends of E10 or less are used in more than ...
Four-stroke cycle used in gasoline/petrol engines: intake (1), compression (2), power (3), and exhaust (4). The right blue side is the intake port and the left brown side is the exhaust port. The cylinder wall is a thin sleeve surrounding the piston head which creates a space for the combustion of fuel and the genesis of mechanical energy.
1ZR-FE in Toyota Corolla 1.6. The Toyota 1ZR-FE is a DOHC, 16-valve, 1.6 L (1,598 cc) engine equipped with dual VVT-i. This engine is available with either manual gearbox (5 or 6 Speed), a "multi-mode" manual transmission (MM-T 5 Speed) or an automatic gearbox (4 Speed). This new engine is now replacing the 3ZZ-FE engine in most applications.
All Wisconsin's products were 4-cycle and they had power outputs from 2.4 to 65.9 horsepower (2 to 49 kW). There were single, inline two, V-two, and V-four cylinder models. The engines were designed for outdoor field service in industries including agriculture, construction, marine, oil-field equipment and railway maintenance. [ 6 ]
BMW M1. The E25 Turbo concept sports car was built by BMW as a celebration for the 1972 Summer Olympics in Munich. [1][2] It was designed by Paul Bracq, with gullwing doors and was based on a modified 2002 chassis with a mid-mounted engine. [2] The Turbo featured a 276 hp turbocharged version of the engine from the BMW 2002, foam-filled front ...
Nissan QR engine. The KA engines were a series of four-stroke inline-four gasoline piston engines manufactured by Nissan, which were offered in 2.0 and 2.4 L. The engines blocks were made of cast-iron, while the cylinder heads were made of aluminum. Despite their large capacity, this motor was not equipped with balance shafts.
The E16 is a 1.6 L (1,597 cc) engine produced from 1982 through 1988. It has a 76 mm × 88 mm (2.99 in × 3.46 in) bore and stroke. The first generation of this engine used a valve cover that bolted to the rocker shaft studs. This design was replaced in September 1986 with a valve cover that bolted to the head.