Net Deals Web Search

  1. Ads

    related to: concrete mix ratio

Search results

  1. Results From The WOW.Com Content Network
  2. Concrete - Wikipedia

    en.wikipedia.org/wiki/Concrete

    Instead of using a 'nominal mix' of 1 part cement, 2 parts sand, and 4 parts aggregate (the second example from above), a civil engineer will custom-design a concrete mix to exactly meet the requirements of the site and conditions, setting material ratios and often designing an admixture package to fine-tune the properties or increase the ...

  3. Water–cement ratio - Wikipedia

    en.wikipedia.org/wiki/Water–cement_ratio

    The water–cement ratio ( w/c ratio, or water-to-cement ratio, sometimes also called the Water-Cement Factor, f) is the ratio of the mass of water ( w) to the mass of cement ( c) used in a concrete mix: The typical values of this ratio f = w⁄c are generally comprised in the interval 0.40 and 0.60. The water-cement ratio of the fresh concrete ...

  4. Properties of concrete - Wikipedia

    en.wikipedia.org/wiki/Properties_of_concrete

    The ultimate strength of concrete is influenced by the water-cementitious ratio (w/cm), the design constituents, and the mixing, placement and curing methods employed.All things being equal, concrete with a lower water-cement (cementitious) ratio makes a stronger concrete than that with a higher ratio. [2]

  5. Types of concrete - Wikipedia

    en.wikipedia.org/wiki/Types_of_concrete

    Regular concrete is the lay term for concrete that is produced by following the mixing instructions that are commonly published on packets of cement, typically using sand or other common material as the aggregate, and often mixed in improvised containers. The ingredients in any particular mix depends on the nature of the application.

  6. Pervious concrete - Wikipedia

    en.wikipedia.org/wiki/Pervious_concrete

    The mixture has a water-to-cement ratio of 0.28 to 0.40 with a void content of 15 to 25 percent. [8] The correct quantity of water in the concrete is critical. A low water to cement ratio will increase the strength of the concrete, but too little water may cause surface failure. A proper water content gives the mixture a wet-metallic appearance.

  7. Abrams' law - Wikipedia

    en.wikipedia.org/wiki/Abrams'_law

    Abrams' law. Abrams' law (also called Abrams' water-cement ratio law) [1] is a concept in civil engineering. The law states the strength of a concrete mix is inversely related to the mass ratio of water to cement. [1] [2] As the water content increases, the strength of concrete decreases. Abrams’ law is a special case of a general rule ...

  1. Ads

    related to: concrete mix ratio