Search results
Results From The WOW.Com Content Network
Alcohol by volume (abbreviated as alc/vol or ABV) is a standard measure of the volume of alcohol contained in a given volume of an alcoholic beverage, expressed as a volume percent. [1] [2] [3] It is defined as the number of millilitres (mL) of pure ethanol present in 100 mL (3.5 imp fl oz; 3.4 US fl oz) of solution at 20 °C (68 °F).
189.42 mL. 6.39 US fl oz. 6.66 imp oz. 1⁄3 of an Imperial pint. Short for Nipperkin. Strong ale and Barley wine were usually bottled in nips [3] Metric measurement glasses and containers usually round up to a metric half pint of 200 mL (7 imp oz). small glass (US) 236.59 mL. 8 US fl oz.
Standard drink. United States standard drinks of beer, malt liquor, wine, and spirits compared. Each contains about 14 grams or 17.7 ml of ethanol. A standard drink or (in the UK) unit of alcohol is a measure of alcohol consumption representing a fixed amount of pure alcohol. The notion is used in relation to recommendations about alcohol ...
In Canada, a teaspoon is historically 1⁄6 imperial fluid ounce (4.74 mL) and a tablespoon is 1⁄2 imperial fl oz (14.21 mL). In both Britain and Canada, cooking utensils come in 5 mL for teaspoons and 15 mL for tablespoons, hence why it is labelled as that on the chart. The volumetric measures here are for comparison only.
The US fluid ounce is based on the US gallon, which in turn is based on the wine gallon of 231 cubic inches that was used in the United Kingdom prior to 1824. With the adoption of the international inch, the US fluid ounce became 1⁄128 gal × 231 in 3 /gal × (2.54 cm/in) 3 = 29.5735295625 mL exactly, or about 4% larger than the imperial unit.
For a complete list of all dimensions, see full list of units . { {Convert}} uses unit-codes, which are similar to, but not necessarily exactly the same as, the usual written abbreviation for a given unit. These unit-codes are displayed in column 3 of the following tables. These are accepted as input by { {convert}} as the second and third ...
236.588 mL. The cup is a cooking measure of volume, commonly associated with cooking and serving sizes. In the US, it is traditionally equal to one-half US pint (236.6 ml). Because actual drinking cups may differ greatly from the size of this unit, standard measuring cups may be used, with a metric cup being 250 millilitres .
The general relationship between absorbed dose and equivalent dose can be represented as. H = Q ⋅ D. where H is the equivalent dose, D is the absorbed dose, and Q is a dimensionless quality factor. Thus, for any quantity of D measured in Gy, the numerical value for H measured in Sv may be different.