Search results
Results From The WOW.Com Content Network
Use alternate cutting tools whenever possible. Do not chop at heights above your head when you are working with a hand axe. Do not carry sharp or pointed hand tools such as screwdrivers, scribes, aviation snips, scrapers, chisels, or files in your pocket unless the tool, or your pocket, is sheathed. Do not perform makeshift repairs to tools.
Hand Tool Safety: Files, Chisels, Hammers, Screwdrivers. Before using any of these tools inspect it to ensure that it is in good condition. Files/Rasps. Do not use a file as a pry bar, hammer, screwdriver or chisel. When using a file or a rasp, grasp the handle in one hand and the toe of the file in the other. Do not hammer on a file.
Hand Tool Safety: Electrical Powered Tools. Do not use power equipment or tools on which you have not been trained. Keep power cords away from the path of drills, saws, vacuum cleaners, floor polishers, mowers, knives, grinders, irons and presses. Do not use cords that have splices, exposed wires, or cracked or frayed ends.
Hand Tool Safety: Using Hammers Safely. Use a hammer only if it is in good condition. The head should not be mushroomed and it should be firmly attached to the handle. Be certain that both the hammer and your hands are clean. Hammers with damaged heads or broken handles should be repaired or replaced. When replacing a wooden handle, apply glue ...
But workers who use simple hand tools shouldn’t be lulled into a false sense of safety. Consider these hazards: Using a screwdriver as a chisel may cause the tip of the screwdriver to break and fly, hitting the user or other employees. If a wooden handle on a tool such as a hammer or an axe is loose, splintered or cracked, the head of the ...
Alert 10 – 16 Use of an Improper Tool Results in Hand Injury. The rig activity at the time of the incident was pulling out of the hole and laying down 16” BHA. The drill crew was up to the Near Bit Reamer (NBR). The rig crew started to retrieve the float from the NBR which was still in the elevators. A floor crewman had a hex wrench with a ...
Hand Tool Safety: Use of Pliers. There are many types of pliers. The most commonly used are the 6-inch combination slip-joint pliers. The slip-joint permits the jaws to be opened wider at the hinge pin for gripping large diameter objects. Some combination pliers are made with a side-cutter arrangement for cutting wire.
Hand Tool Safety: Saws, Wrenches, Pliers and Vises. Keep control of saws by releasing downward pressure at the end of the stroke. Do not use an adjustable-blade saw (such as a hacksaw, coping saw, keyhole saw, or bow saw) if the blade is not taut. Do not use a saw that has dull saw blades. Oil saw blades after each use of the saw.
Hand Tool Safety: Clamps, Snips, Toolboxes. Clamps. Do not use the C-clamp for hoisting materials. Do not use the C-clamp as a permanent fastening device. Snips. Wear your safety glasses or safety goggles when using snips to cut materials. Wear your work gloves when cutting materials with snips. Do not use straight-cut snips to cut curves.
Hand Power Tool Safety Read and familiarize yourself with the manufacturer’s instructions, including precautions and how to respond to an emergency. Use recommended protective equipment, such as safety goggles, clothing, earplugs, dust masks, or gloves and avoid loose clothes, ties, or jewelry.