Search results
Results From The WOW.Com Content Network
The type, complexity and size of a solar water heating system is mostly determined by: Changes in ambient temperature and solar radiation between summer and winter; Changes in ambient temperature during the day-night cycle; Possibility of the potable water or collector fluid overheating or freezing
A solar thermal collector collects heat by absorbing sunlight. The term "solar collector" commonly refers to a device for solar hot water heating, but may refer to large power generating installations such as solar parabolic troughs and solar towers or non- water heating devices such as solar cookers or solar air heaters. [ 1]
An air source heat pump transfers some of this from one place to another, for example between the outside and inside of a building. An air-to air system can be designed to transfer heat in either direction, to heat or cool the interior of the building in winter and summer respectively. Internal ducting may be used to distribute the air. [ 7]
Water heating is a heat transfer process that uses an energy source to heat water above its initial temperature. Typical domestic uses of hot water include cooking, cleaning, bathing, and space heating. In industry, hot water and water heated to steam have many uses. Domestically, water is traditionally heated in vessels known as water heaters ...
Storage temperatures of 90 °C (194 °F) are sufficient to supply both domestic hot water and space heating. The first such house was MIT Solar House #1, in 1939. An eight-unit apartment building in Oberburg, Switzerland was built in 1989, with three tanks storing a total of 118 m 3 (4,167 cubic feet) that store more heat than the building ...
For example, a conventional heat pump system used to heat a building in Montana's −57 °C (−70 °F) low temperature or cool a building in the highest temperature ever recorded in the US—57 °C (134 °F) in Death Valley, California, in 1913 would require a large amount of energy due to the extreme difference between inside and outside air ...
An interesting property of heat pipes is the temperature range over which they are effective. Initially, it might be suspected that a water-charged heat pipe only works when the hot end reaches the boiling point (100 °C, 212 °F, at normal atmospheric pressure) and steam is transferred to the cold end.
A heat pump is the central unit for the building's heating and cooling. It usually comes in two main variants: Liquid-to-water heat pumps (also called water-to-water) are hydronic systems that carry heating or cooling through the building through pipes to conventional radiators, underfloor heating, baseboard radiators and hot water tanks. These ...