Search results
Results From The WOW.Com Content Network
Rolling code vs. fixed code RF remote control. Remote controls send a digital code word to the receiver. If the receiver determines the codeword is acceptable, then the receiver will actuate the relay, unlock the door, or open the barrier. Simple remote control systems use a fixed code word; the code word that opens the gate today will also ...
RC-5. The RC-5 protocol was developed by Philips in the early 1980s as a semi-proprietary consumer IR ( infrared) remote control communication protocol for consumer electronics. It was subsequently adopted by most European manufacturers, as well as by many US manufacturers of specialty audio and video equipment.
In electronics, a remote control (also known as a remote or clicker) is an electronic device used to operate another device from a distance, usually wirelessly. In consumer electronics, a remote control can be used to operate devices such as a television set, DVD player or other digital home media appliance. A remote control can allow operation ...
In Electrical Power Systems and Industrial Automation, ANSI Device Numbers can be used to identify equipment and devices in a system such as relays, circuit breakers, or instruments. The device numbers are enumerated in ANSI/ IEEE Standard C37.2 "Standard for Electrical Power System Device Function Numbers, Acronyms, and Contact Designations" .
C1 controls. In 1973, ECMA-35 and ISO 2022 attempted to define a method so an 8-bit "extended ASCII" code could be converted to a corresponding 7-bit code, and vice versa. In a 7-bit environment, the Shift Out would change the meaning of the 96 bytes 0x20 through 0x7F (i.e. all but the C0 control codes), to be the characters that an 8-bit environment would print if it used the same code with ...
IBM Endpoint Manager Remote Control 897: Unofficial: Brocade SMI-S RPC 898: Unofficial: Brocade SMI-S RPC SSL 902: Unofficial: VMware ESXi: 903: Unofficial: VMware ESXi: 953: Yes: Reserved: BIND remote name daemon control (RNDC) 981: Unofficial: Remote HTTPS management for firewall devices running embedded Check Point VPN-1 software: 987 Unofficial
Remote terminal unit. A remote terminal unit ( RTU) is a microprocessor -controlled electronic device that interfaces objects in the physical world to a distributed control system or SCADA (supervisory control and data acquisition) system by transmitting telemetry data to a master system, and by using messages from the master supervisory system ...
configuration deviation list: CDU control/display unit CFIT controlled flight into terrain: CFG constant frequency generator: CFR Code of Federal Regulations: In the United States CG center of gravity: CH Course Heading CHDO certificate-holding district office CHP Course Heading Panel CHT Cylinder Head Temperature (Piston engine aviation) CI