Search results
Results From The WOW.Com Content Network
A defrost timer taken out of a household refrigerator. The defrost mechanism in a refrigerator heats the cooling element (evaporator coil) for a short period of time and melts the frost that has formed on it. [1] The resulting water drains through a duct at the back of the unit. Defrosting is controlled by an electric or electronic timer.
Damper (flow) Opposed blade dampers in a mixing duct. A damper is a valve or plate that stops or regulates the flow of air inside a duct, chimney, VAV box, air handler, or other air-handling equipment. A damper may be used to cut off central air conditioning (heating or cooling) to an unused room, or to regulate it for room-by-room temperature ...
An absorption refrigerator is a refrigerator that uses a heat source to provide the energy needed to drive the cooling process. Solar energy, burning a fossil fuel, waste heat from factories, and district heating systems are examples of convenient heat sources that can be used. An absorption refrigerator uses two coolants: the first coolant ...
Noise, vibration, and harshness ( NVH ), also known as noise and vibration ( N&V ), is the study and modification of the noise and vibration characteristics of vehicles, particularly cars and trucks. While noise and vibration can be readily measured, harshness is a subjective quality, and is measured either via jury evaluations, or with ...
Harmonic balancer lower pulley on a four-cylinder engine. A harmonic damper is a device fitted to the free (accessory drive) end of the crankshaft of an internal combustion engine to counter torsional and resonance vibrations from the crankshaft. This device must be an interference fit to the crankshaft in order to operate in an effective manner.
Vapour-compression refrigeration or vapor-compression refrigeration system ( VCRS ), [1] in which the refrigerant undergoes phase changes, is one of the many refrigeration cycles and is the most widely used method for air conditioning of buildings and automobiles. It is also used in domestic and commercial refrigerators, large-scale warehouses ...
Fan (machine) A typical electric fan. A table fan. Fans are used to force air into low- and high-bypass jet engines, seen here on a Boeing 777. A fan is a powered machine used to create a flow of air. A fan consists of a rotating arrangement of vanes or blades, generally made of wood, plastic, or metal, which act on the air.
Speed Dependent Damping Control. Speed Dependent Damping Control (also called SD²C) was an automatic damper system installed on late-1980s and early-1990s Cadillac automobiles. This system firmed up the suspension at 25 mph (40 km/h) and again at 60 mph (97 km/h). The firmest setting was also used when starting from a standstill until 5 mph (8 ...