Search results
Results From The WOW.Com Content Network
Active noise control ( ANC ), also known as noise cancellation ( NC ), or active noise reduction ( ANR ), is a method for reducing unwanted sound by the addition of a second sound specifically designed to cancel the first. The concept was first developed in the late 1930s; later developmental work that began in the 1950s eventually resulted in ...
It is heated at the left, e.g., by a propane flame and heat is released to ambient temperature by a heat exchanger. If the temperature at the left side is high enough, the system starts to produces a loud sound. Thermoacoustic engines still suffer from some limitations, including that: The device usually has low power-to-volume ratio.
The noise figure can also be seen as the decrease in signal-to-noise ratio (SNR) caused by passing a signal through a system if the original signal had a noise temperature of 290 K. This is a common way of expressing the noise contributed by a radio frequency amplifier regardless of the amplifier's gain.
In electronics, noise is an unwanted disturbance in an electrical signal. [ 1]: 5. Noise generated by electronic devices varies greatly as it is produced by several different effects. In particular, noise is inherent in physics and central to thermodynamics. Any conductor with electrical resistance will generate thermal noise inherently.
Noise floor. Measurement from a spectrum analyzer showing a noise-like measurement from an unspecified component. In signal theory, the noise floor is the measure of the signal created from the sum of all the noise sources and unwanted signals within a measurement system, where noise is defined as any signal other than the one being monitored.
Noise -cancelling headphones alongside a carry case. Noise-cancelling headphones are headphones which suppress unwanted ambient sounds using active noise control. This is distinct from passive headphones which, if they reduce ambient sounds at all, use techniques such as soundproofing . Noise cancellation makes it possible to listen to audio ...
In balanced audio systems, there are equal and opposite signals (difference-mode) in inputs, and any interference imposed on both leads will be subtracted, canceling out that interference (i.e., the common-mode). CMRR is a measure of a system's ability to ignore such interference and especially hum at its input.
An operating temperature is the allowable temperature range of the local ambient environment at which an electrical or mechanical device operates. The device will operate effectively within a specified temperature range which varies based on the device function and application context, and ranges from the minimum operating temperature to the maximum operating temperature (or peak operating ...