Search results
Results From The WOW.Com Content Network
A binary number is a number expressed in the base-2 numeral system or binary numeral system, a method for representing numbers that uses only two symbols for the natural numbers: typically "0" and "1" .
Decimal: 9 1. Binary : 1001 0001. Hence the numerical range for one unpacked BCD byte is zero through nine inclusive, whereas the range for one packed BCD byte is zero through ninety-nine inclusive. To represent numbers larger than the range of a single byte any number of contiguous bytes may be used.
IRIG J-1 timecode consists of 15 characters (150 bit times), sent once per second at a baud rate of 300 or greater: <SOH>DDD:HH:MM:SS<CR><LF>. SOH is the ASCII "start of header" code, with binary value 0x01. DDD is the ordinal date (day of year), from 1 to 366. HH, MM and SS are the time of the start bit.
A time code was added to WWVB on July 1, 1965. This made it possible for clocks to be designed that could receive the signal, decode it, and then automatically synchronize themselves. The time code format has changed only slightly since 1965; it sends a decimal time code, using four binary bits to send each digit in binary-coded decimal (BCD).
A binary clock is a clock that displays the time of day in a binary format. Originally, such clocks showed each decimal digit of sexagesimal time as a binary value, but presently binary clocks also exist which display hours, minutes, and seconds as binary numbers. Most binary clocks are digital, although analog varieties exist.
Static binary translation. A translator using static binary translation aims to convert all of the code of an executable file into code that runs on the target architecture without having to run the code first, as is done in dynamic binary translation. This is very difficult to do correctly, since not all the code can be discovered by the ...
Data conversion is the conversion of computer data from one format to another. Throughout a computer environment, data is encoded in a variety of ways. For example, computer hardware is built on the basis of certain standards, which requires that data contains, for example, parity bit checks. Similarly, the operating system is predicated on ...
Braille ASCII (or more formally The North American Braille ASCII Code, also known as SimBraille) is a subset of the ASCII character set which uses 64 of the printable ASCII characters to represent all possible dot combinations in six-dot braille. It was developed around 1969 and, despite originally being known as North American Braille ASCII ...