Search results
Results From The WOW.Com Content Network
The temperature range for process annealing ranges from 260 °C (500 °F) to 760 °C (1400 °F), depending on the alloy in question. This process is mainly suited for low-carbon steel. The material is heated up to a temperature just below the lower critical temperature of steel.
Tempering is a heat treatment technique applied to ferrous alloys, such as steel or cast iron, to achieve greater toughness by decreasing the hardness of the alloy. The reduction in hardness is usually accompanied by an increase in ductility, thereby decreasing the brittleness of the metal.
Globally. A microwave oven or simply microwave is an electric oven that heats and cooks food by exposing it to electromagnetic radiation in the microwave frequency range. [ 1] This induces polar molecules in the food to vibrate [ 2] and produce thermal energy in a process known as dielectric heating. Microwave ovens heat foods quickly and ...
Precipitation hardening, also called age hardening or particle hardening, is a heat treatment technique used to increase the yield strength of malleable materials, including most structural alloys of aluminium, magnesium, nickel, titanium, and some steels, stainless steels, and duplex stainless steel. In superalloys, it is known to cause yield ...
As with most alloys, the melting point of stainless steel is expressed in the form of a range of temperatures, and not a single temperature. [9] This temperature range goes from 1,400 to 1,530 °C (2,550 to 2,790 °F; 1,670 to 1,800 K; 3,010 to 3,250 °R) [ 10 ] depending on the specific consistency of the alloy in question.
In materials science, recrystallization is a process by which deformed grains are replaced by a new set of defect -free grains that nucleate and grow until the original grains have been entirely consumed. Recrystallization is usually accompanied by a reduction in the strength and hardness of a material and a simultaneous increase in the ...
In 200 series stainless steels the structure is obtained by adding manganese and nitrogen, with a small amount of nickel content, making 200 series a cost-effective nickel-chromium austenitic type stainless steel. 300 series stainless steels are the larger subgroup. The most common austenitic stainless steel and most common of all stainless ...
China steel grades : GB standard. Czech steel grades : ČSN standard. Russia steel grades : GOST standard. Spain steel grades : UNE standard. France steel grades : AFNOR standard. Italy steel grades : UNI standard. Sweden steel grades : SIS standard. Norway steel grades : DNV standard.