Search results
Results From The WOW.Com Content Network
A transponder (short for trans mitter-res ponder [1] and sometimes abbreviated to XPDR, [2] XPNDR, [3] TPDR [4] or TP [5]) is an electronic device that produces a response when it receives a radio-frequency interrogation. Aircraft have transponders to assist in identifying them on air traffic control radar. Collision avoidance systems have been ...
FuG 25a Erstling (German: "Firstborn", "Debut", sometimes FuGe) was an identification friend or foe (IFF) transponder installed in Luftwaffe aircraft starting in 1941 in order to allow German Freya radar stations to identify them as friendly. The system was also used as a navigation transponder as part of the EGON night bombing system during ...
The aviation transponder interrogation modes are the standard formats of pulsed sequences from an interrogating Secondary Surveillance Radar (SSR) or similar Automatic Dependent Surveillance-Broadcast (ADS-B) system. The reply format is usually referred to as a "code" from a transponder, which is used to determine detailed information from a ...
Identification, friend or foe ( IFF) is a combat identification system designed for command and control. It uses a transponder that listens for an interrogation signal and then sends a response that identifies the broadcaster. IFF systems usually use radar frequencies, but other electromagnetic frequencies, radio or infrared, may be used. [1]
Garmin® Introduces GTX 3000 TCAS II/ACAS II-Compatible, ADS-B-Compliant Transponder for Business, Regional Aircraft OLATHE, Kan.--(BUSINESS WIRE)-- Garmin International Inc., a unit of Garmin Ltd ...
0041–0057. Belgium. Assigned for VFR traffic under Flight Information Services (BXL FIC). [citation needed] 0100. Australia. Flights operating at aerodromes (in lieu of codes 1200, 2000 or 3000 when assigned by ATC or noted in the Enroute Supplement). [6] 0100–0400.
List of aircraft type designators. An aircraft type designator is a two-, three- or four-character alphanumeric code designating every aircraft type (and some sub-types) that may appear in flight planning. These codes are defined by both the International Civil Aviation Organization (ICAO) and the International Air Transport Association (IATA).
Gillham code is a zero-padded 12-bit binary code using a parallel nine- [1] to eleven-wire interface, [2] the Gillham interface, that is used to transmit uncorrected barometric altitude between an encoding altimeter or analog air data computer and a digital transponder. It is a modified form of a Gray code and is sometimes referred to simply as ...