Search results
Results From The WOW.Com Content Network
The National Association of EMS Officials recommends this protocol when a patient's core temperature is above 104 degrees Fahrenheit. The patient should remain in the ice bath until their body ...
Recommended hot forming and annealing/soaking temperatures UNS No. Grade EN No. Hot forming temperature range Minimum soaking temperature S32304 1.4362 1,150 to 950 °C (2,100 to 1,740 °F) 980 °C (1,800 °F) S32205 1.4462 1,230 to 950 °C (2,250 to 1,740 °F) 1,040 °C (1,900 °F) S32750 1.4410 1,235 to 1,025 °C (2,255 to 1,877 °F)
Precipitation hardening, also called age hardening or particle hardening, is a heat treatment technique used to increase the yield strength of malleable materials, including most structural alloys of aluminium, magnesium, nickel, titanium, and some steels, stainless steels, and duplex stainless steel. In superalloys, it is known to cause yield ...
Stainless steel, also known as inox, corrosion-resistant steel ( CRES ), and rustless steel, is an alloy of iron that is resistant to rusting and corrosion. It contains iron with chromium and other elements such as molybdenum, carbon, nickel and nitrogen depending on its specific use and cost. Stainless steel's resistance to corrosion results ...
Cryogenic hardening is a cryogenic treatment process where the material is cooled to approximately −185 °C (−301 °F), usually using liquid nitrogen. It can have a profound effect on the mechanical properties of certain steels, provided their composition and prior heat treatment are such that they retain some austenite at room temperature.
In 200 series stainless steels the structure is obtained by adding manganese and nitrogen, with a small amount of nickel content, making 200 series a cost-effective nickel-chromium austenitic type stainless steel. 300 series stainless steels are the larger subgroup. The most common austenitic stainless steel and most common of all stainless ...
In metallurgy and materials science, annealing is a heat treatment that alters the physical and sometimes chemical properties of a material to increase its ductility and reduce its hardness, making it more workable. It involves heating a material above its recrystallization temperature, maintaining a suitable temperature for an appropriate ...
Martensitic stainless steels can be high- or low-carbon steels built around the composition of iron, 12% up to 17% chromium, carbon from 0.10% (Type 410) up to 1.2% (Type 440C): [ 9] Up to about 0.4%C they are used mostly for their mechanical properties in applications such as pumps, valves, and shafts.