Search results
Results From The WOW.Com Content Network
Sensotronic Brake Control (SBC) is an electro-hydraulic brake system developed by Daimler and Bosch. In this system, the wheel brake cylinders of a vehicle are operated through a servomechanism, offering precise and responsive braking. The SBC system was first introduced on the R230 SL-class, which was released in Europe in October 2001. [1]
Electronic stability control (ESC), also referred to as electronic stability program (ESP) or dynamic stability control (DSC), is a computerized technology [1] [2] that improves a vehicle's stability by detecting and reducing loss of traction . [3]
Exhaust brakes are simpler in operation than an engine brake.Essentially, the exhaust pipe of the vehicle is restricted by a valve.This raises the pressure in the exhaust system, forcing the engine to work harder on the exhaust stroke of its cylinders, so again the engine is acting as an air compressor, with the power required to compress the air being withheld from the exhaust pipe, retarding ...
A hill-holder is a motor vehicle device that holds the brake until the clutch is at the friction point, making it easier for a stationary vehicle to start uphill. By holding the brake in position while the vehicle is put into gear, it prevents rollback.
(2018 model year) [24] Percent of vehicles produced Sept. 1 to Aug. 31 with AEB (2019 model year) [20] Percent of vehicles produced Sept. 1 to Aug. 31 with AEB (2020 model year) [20] Percent of 2021 models with standard AEB (2021 model year) [20] As reported by manufacturer for light-duty vehicles 3,850 kg (8,500 lb) or less gross vehicle weight
Adaptive cruise control does not provide full autonomy: the system only provides some help to the driver, but does not drive the car by itself. [3] For example, the driver is able to set the cruise control to 55mph, if the car while traveling that speed catches up to another vehicle going only 45mph, the ACC will cause the car to automatically brake and maintain a safe distance behind the ...
Controllers designed using robust control methods tend to be able to cope with small differences between the true system and the nominal model used for design. [20] The early methods of Bode and others were fairly robust; the state-space methods invented in the 1960s and 1970s were sometimes found to lack robustness.
Foundation components are the brake-assembly components at the wheels of a vehicle, named for forming the basis of the rest of the brake system. These mechanical parts contained around the wheels are controlled by the air brake system. The three types of foundation brake systems are “S” cam brakes, disc brakes and wedge brakes. [3]