Net Deals Web Search

Search results

1. Results From The WOW.Com Content Network

2. Cement board - Wikipedia

   en.wikipedia.org/wiki/Cement_board

   This 5 ⁄ 16 inch (7.9 mm) thick cement board is designed as an underlayment for tile floors. These are 3-by-5-foot (91 by 152 cm) sheets. These are 3-by-5-foot (91 by 152 cm) sheets. A cement board is a combination of cement and reinforcing fibers formed into sheets, of varying thickness that are typically used as a tile backing board. [ 1 ]

3. 5-inch/54-caliber Mark 42 gun - Wikipedia

   en.wikipedia.org/wiki/5-inch/54-caliber_Mark_42_gun

   United States naval gun terminology indicates the gun fires a projectile 5 inches (127.0 mm) in diameter, and the barrel is 54 calibers long (barrel length is 5" × 54 = 270" or 6.9 meters.) [1] In the 1950s a gun with more range and a faster rate of fire than the 5"/38 caliber gun used in World War II was needed, therefore, the gun was created ...

4. 5.8×42mm - Wikipedia

   en.wikipedia.org/wiki/5.8×42mm

   The 5.8×42mm "heavy round" cartridge has the same dimensions as the standard 5.8×42mm cartridge, but utilizes a longer streamlined bullet with a heavy steel core for increased performance at extended ranges and penetration. As of 2010, all 5.8×42mm cartridge variants have been succeeded by the DBP10 variant.

5. Homasote - Wikipedia

   en.wikipedia.org/wiki/Homasote

   Homasote is used in theatrical sets as a noise deadening layer for stage platforms consisting of a 3 ⁄ 4-inch (19 mm) plywood sublayer, a 1 ⁄ 2-inch (13 mm) Homasote layer, and a 1 ⁄ 4-inch (6.4 mm) Masonite top layer.

6. BL 9.2-inch Mk IX – X naval gun - Wikipedia

   en.wikipedia.org/wiki/BL_9.2-inch_Mk_IX_–_X...

   The BL 9.2-inch Mk IX and Mk X guns [note 1] were British breech loading 9.2-inch (234 mm) guns of 46.7 calibre, in service from 1899 to the 1950s as naval and coast defence guns. They had possibly the longest, most varied and successful service history of any British heavy ordnance.

7. Structural insulated panel - Wikipedia

   en.wikipedia.org/wiki/Structural_insulated_panel

   EPS is the most common of the foams used and has an R-value (thermal resistance) of about 4 °F·ft 2 ·h/BTU (equivalent to about 0.7 K·m 2 /W) per 25 mm thickness, which would give the 3.5 inches (89 mm) of foam in a 4.5-inch-thick (110 mm) panel an R value of 13.8 (caution: extrapolating R-values over thickness may be imprecise due to non ...