Search results
Results From The WOW.Com Content Network
The Rolleiflex 6000 series is a line of medium format single lens reflex cameras made by Rollei, in regular production starting from 1983 with the 6006.The 6006 was derived from the earlier SLX (1976) and retains compatibility with its lenses and accessories, adding an interchangeable film back with an integral dark slide.
A twilight switch is an electronic component that allows the automatic activation of a lighting circuit when natural light drops in a given environment. Among a large number of uses, the most common is to enable automatic lighting of streets, roads, highways, roads, gardens, courtyards, etc., when sunlight drops below a certain level (e.g.: a ...
The plug and socket are rated 16 A 250 V AC and are intended for use only on systems having nominal voltages between 200 V and 250 V AC The plug pins are 4.5 mm in diameter, line and neutral are on centres 19 mm apart. The earth pin is offset 3.0 mm. The line pin is on the right when looking at a socket with the earth pin offset up.
A variety of different kinds of IEC 60320 plugs and sockets. IEC 60320 Appliance couplers for household and similar general purposes [1] is a set of standards from the International Electrotechnical Commission (IEC) specifying non-locking connectors for connecting power supply cords to electrical appliances of voltage not exceeding 250 V (a.c.) and rated current not exceeding 16 A. [1 ...
Field artillery used manual time fuze setting, at its simplest this uses a hand ‘key’ or wrench to turn the fuze nose to the required setting. Manual fuze setters are set at the fuze length and then used to set the fuze, this has the advantage of ensuring that every fuze is correctly and identically set.
Australasian standard three pin plug, with part insulation on the Active/Line and Neutral pins. AS/NZS 3112 is the harmonised/joint Australian and New Zealand Standard for AC power plugs (male) and sockets (female). The standard is used in Australia, New Zealand, Fiji, Tonga, Solomon Islands, Papua New Guinea and several other Pacific island ...
An inductive proximity sensor is a non-contact electronic proximity sensor. It is used for positioning and detection of metal objects. The sensing range of an inductive switch is dependent on the type of metal being detected. Ferrous metals, such as iron and steel, allow for a longer sensing range, while nonferrous metals, such as aluminum and ...
Goals of the MIPI Sensor Working Group effort were first announced in November 2014 at the MEMS Executive Congress in Scottsdale AZ. [8]Electronic design automation tool vendors including Cadence, [9] Synopsys [10] and Silvaco [11] have released controller IP blocks and associated verification software for the implementation of the I3C bus in new integrated circuit designs.