Search results
Results From The WOW.Com Content Network
Mobile High-Definition Link ( MHL) is an industry standard for a mobile audio/video interface that allows the connection of smartphones, tablets, and other portable consumer electronics devices to high-definition televisions (HDTVs), audio receivers, and projectors. The standard was designed to share existing mobile device connectors, such as ...
It is primarily used to connect a video source to a display device such as a computer monitor. It can also carry audio, USB, and other forms of data. DisplayPort is backward compatible with other interfaces such as HDMI and DVI through the use of active or passive adapters. Male Mini DisplayPort plug Mini DisplayPort
On the Pi 1 Model B+ and later models the USB/Ethernet chip contains a five-port USB hub, of which four ports are available, while the Pi 1 Model B only provides two. On the Pi Zero, the USB port is also connected directly to the SoC, but it uses a micro USB (OTG) port. Unlike all other Pi models, the 40 pin GPIO connector is omitted on the Pi ...
The cable is actually a crossover cable. It swaps all receive and transmit lanes; e.g. HS1TX (P) of the source is connected to HS1RX (P) of the sink. Thunderbolt is the brand name of a hardware interface for the connection of external peripherals to a computer. It was developed by Intel in collaboration with Apple.
For broader coverage of this topic, see USB. This article provides information about the communications aspects of Universal Serial Bus ( USB ): Signaling, Protocols, Transactions. USB is an industry-standard used to specify cables, connectors, and protocols that are used for communication between electronic devices.
Ethernet over USB is the use of a USB link as a part of an Ethernet network, resulting in an Ethernet connection over USB (instead of e.g. PCI or PCIe). USB over Ethernet (also called USB over Network or USB over IP ) is a system to share USB-based devices over Ethernet, Wi-Fi , or the Internet, allowing access to devices over a network.
A USB-C multiport adapter converts the device's native video stream to DisplayPort/HDMI/VGA, allowing it to be displayed on an external display, such as a television set or computer monitor. It is also used on USB-C docks designed to connect a device to a power source, external display, USB hub, and optional extra (such as a network port) with ...
A USB cable, by definition, has a plug on each end—one A (or C) and one B (or C)—and the corresponding receptacle is usually on a computer or electronic device. The mini and micro formats may connect to an AB receptacle, which accepts either an A or a B plug, that plug determining the behavior of the receptacle.