Search results
Results From The WOW.Com Content Network
In electrical and safety engineering, hazardous locations (HazLoc, pronounced haz·lōk) are places where fire or explosion hazards may exist. Sources of such hazards include gases, vapors, dust, fibers, and flyings, which are combustible or flammable. Electrical equipment installed in such locations can provide an ignition source, due to ...
Korg SP-100: An 88 key velocity sensitive hammer-action simulation keyboard. Weighing just over 40 pounds, the 32-note polyphonic Korg SP-100 is a truly portable (and affordable) answer for the gigging musician. The 88-note hammer action keyboard is velocity sensitive with three selections for touch control: Light, standard and heavy.
Operating temperature. An operating temperature is the allowable temperature range of the local ambient environment at which an electrical or mechanical device operates. The device will operate effectively within a specified temperature range which varies based on the device function and application context, and ranges from the minimum ...
OBD-II PIDs (On-board diagnostics Parameter IDs) are codes used to request data from a vehicle, used as a diagnostic tool.. SAE standard J1979 defines many OBD-II PIDs. All on-road vehicles and trucks sold in North America are required to support a subset of these codes, primarily for state mandated emissions inspections.
Zone 5 uses eight 2-digit codes (51–58) and two sets of 3-digit codes (50x, 59x) to serve South and Central America. Zone 6 uses seven 2-digit codes (60–66) and three sets of 3-digit codes (67x–69x) to serve Southeast Asia and Oceania. Zone 7 uses an integrated numbering plan; two digits (7x) determine the area served: Russia or Kazakhstan.
10–20 system (EEG) The 10–20 system or International 10–20 system is an internationally recognized method to describe and apply the location of scalp electrodes in the context of an EEG exam, polysomnograph sleep study, or voluntary lab research. This method was developed to maintain standardized testing methods ensuring that a subject's ...
The location of the punctuation marks on the upper numerical row is different from modern computer keyboards. The key with ∷ four dots is the margin release. [ 4 ] The arrow key under TAB is the ↣ Backspace key, [ 5 ] which is pointing in the direction the paper would move rather than the way a cursor would move (as on a modern computer ...
C0 and C1 control codes. The C0 and C1 control code or control character sets define control codes for use in text by computer systems that use ASCII and derivatives of ASCII. The codes represent additional information about the text, such as the position of a cursor, an instruction to start a new line, or a message that the text has been ...