Net Deals Web Search

Search results

  1. Results From The WOW.Com Content Network
  2. Identification friend or foe - Wikipedia

    en.wikipedia.org/wiki/Identification_friend_or_foe

    Identification, friend or foe ( IFF) is a combat identification system designed for command and control. It uses a transponder that listens for an interrogation signal and then sends a response that identifies the broadcaster. IFF systems usually use radar frequencies, but other electromagnetic frequencies, radio or infrared, may be used. [ 1]

  3. IFF Mark X - Wikipedia

    en.wikipedia.org/wiki/IFF_Mark_X

    The interrogation signal, sometimes known as the uplink format, consists of two 0.8 μs long pulses on 1030 MHz. The time between the pulses defines which mode is being queried. Mode 1 had two pulses 3 μs apart (±0.2 μs), Mode 2 was 5 μs and Mode 3 was 8 μs. The civil B, C and D were 17, 21 and 25 μs apart.

  4. Air traffic control radar beacon system - Wikipedia

    en.wikipedia.org/wiki/Air_traffic_control_radar...

    Mode 3/A is used to identify each aircraft in the radar's coverage area. Mode C is used to request/report an aircraft's altitude. Two other modes, mode 4 and mode S, are not considered part of the ATCRBS system, but they use the same transmit and receive hardware. Mode 4 is used by military aircraft for the Identification Friend or Foe (IFF ...

  5. Aviation transponder interrogation modes - Wikipedia

    en.wikipedia.org/wiki/Aviation_transponder...

    Provides 4-digit octal unit code (set on ground for fighters, can be changed in flight by transport aircraft) [1] 3: A: Provides a 4-digit octal identification code for the aircraft, set in the cockpit but assigned by the air traffic controller. Mode 3/A is often combined with Mode C to provide altitude information as well. [2] C

  6. List of transponder codes - Wikipedia

    en.wikipedia.org/wiki/List_of_Transponder_Codes

    Non-discrete mode A code reserved use in mode S radar/ADS-B environment where the aircraft identification will be used to correlate the flight plan instead of the mode A code. [1] US: Used exclusively by ADS-B aircraft to inhibit mode 3A transmission. [3] US: Non-discrete code assignments in accordance with FAA Order JO 7110.65, 5-2.

  7. Gillham code - Wikipedia

    en.wikipedia.org/wiki/Gillham_Code

    Gillham code is a zero-padded 12-bit binary code using a parallel nine- [ 1] to eleven-wire interface, [ 2] the Gillham interface, that is used to transmit uncorrected barometric altitude between an encoding altimeter or analog air data computer and a digital transponder. It is a modified form of a Gray code and is sometimes referred to simply ...

  8. Transponder (aeronautics) - Wikipedia

    en.wikipedia.org/wiki/Transponder_(aeronautics)

    The green IDENT button is marked "ID". A transponder (short for trans mitter-res ponder[ 1] and sometimes abbreviated to XPDR, [ 2] XPNDR, [ 3] TPDR [ 4] or TP [ 5]) is an electronic device that produces a response when it receives a radio-frequency interrogation. Aircraft have transponders to assist in identifying them on air traffic control ...

  9. AN/TPS-80 Ground/Air Task Oriented Radar - Wikipedia

    en.wikipedia.org/wiki/AN/TPS-80_Ground/Air_Task...

    The AN/TPS-80 Ground/Air Task Oriented Radar (G/ATOR) is the United States Marine Corps next-generation Air Surveillance/ Air Defense and Air Traffic Control (ATC) Radar. The mobile active electronically scanned array radar system is being developed by Northrop Grumman and was expected to reach initial operating capability in August 2016.