Search results
Results From The WOW.Com Content Network
The US fluid ounce is based on the US gallon, which in turn is based on the wine gallon of 231 cubic inches that was used in the United Kingdom prior to 1824. With the adoption of the international inch, the US fluid ounce became 1⁄128 gal × 231 in 3 /gal × (2.54 cm/in) 3 = 29.5735295625 mL exactly, or about 4% larger than the imperial unit.
189.42 mL. 6.39 US fl oz. 6.66 imp oz. 1⁄3 of an Imperial pint. Short for Nipperkin. Strong ale and Barley wine were usually bottled in nips [ 3] Metric measurement glasses and containers usually round up to a metric half pint of 200 mL (7 imp oz). small glass (US) 236.59 mL. 8 US fl oz.
A fluid ounce (abbreviated fl oz, fl. oz. or oz. fl.) is a unit of volume. An imperial fluid ounce is defined in British law as 28.4130625 millilitres , [ 15 ] a US customary fluid ounce is 29.57353 mL, [ 16 ] and a US food labelling fluid ounce is 30 mL. [ 17 ]
30 to 44 ml (1.0 to 1.5 US fl oz) 59 to 89 ml (2 to 3 US fl oz) There is no official size for a single shot, except in Utah, where a shot is defined as 1.5 US fl oz (44.4 ml). [25] Elsewhere in the U.S., the standard size is generally considered to be 1.25–1.5 US fl oz (37–44 ml).
Length. For measuring length, the U.S. customary system uses the inch, foot, yard, and mile, which are the only four customary length measurements in everyday use. From 1893, the foot was legally defined as exactly 1200⁄3937 m (approximately 0.304 8006 m ). [13] Since July 1, 1959, the units of length have been defined on the basis of 1 yd ...
A beer bottle is typically between 333 and 355 ml (11.3 and 12.0 US fl oz), approximately 1.7 UK units at 5%. 375 ml (12.7 US fl oz) can of light beer (2.7% alcohol) = 0.8 Australian standard drinks; 375 ml (12.7 US fl oz) can of mid-strength beer (3.5% alcohol) = 1 Australian standard drink
This second variation is commonly seen in a double-thimble or "hourglass" form, with two metal cups of different volumes (often in a 3:2 or 2:1 ratio, like a U.S. standard 1.5 fl oz "jigger" and 1 fl oz "pony", or UK standard 25/50mL or 35/70mL combos) spot-welded to each other at their relative bottom surfaces, possibly with a handle between ...
The general relationship between absorbed dose and equivalent dose can be represented as. H = Q ⋅ D. where H is the equivalent dose, D is the absorbed dose, and Q is a dimensionless quality factor. Thus, for any quantity of D measured in Gy, the numerical value for H measured in Sv may be different.