Search results
Results From The WOW.Com Content Network
Automated manual transmissions can be semi-automatic or fully-automatic in operation. Several different systems to automate the clutch and/or shifting have been used over the years, but they will generally use one of the following methods of actuation for the clutch and/or shifting: hydraulic or electro-hydraulic actuation, [12] electro-mechanical, [13] pneumatic, [6] [14] [15] electromagnetic ...
4-speed longitudinal. S4-12 – Lotus Elite type 14 (optional), Autocars/Reliant Sabra sports. S4-18 – Bedford Van, Opel Blitz Van. 4 DS-10 – Transaxle as fitted to the Hanomag F20-F36 and Mercedes L206/L306/L307 FWD Vans. 4 DS-10/2 – Transaxle as fitted to the Hanomag F20-F36 and Mercedes L206/L306/L307 FWD Vans.
The J-series is a 6-speed manual transmission for rear-wheel drive applications, built by Aisin Seiki (Type AZ6). This transmission was used in the Altezza AS200 and RS200. The same Aisin AZ6 transmission is also found in other models such as the Mazda MX-5 (Miata), Nissan Silvia, Mazda RX-8, Lexus IS and Toyota 86/Scion FR-S/Subaru BRZ. Models:
Getrag F23 transmission. The F23 is a five-speed manual transmission manufactured by Getrag in Italy. [citation needed] It is designed for transverse engine applications, primarily by General Motors. It can handle torque inputs of over 230 newton-metres (170 lbf⋅ft ). The F23 has one roll pin, two gearsets on each of three parallel shafts ...
Production of the U660E and U660F commenced in January 2006, Toyota's first 6-speed automatic transaxles for front-wheel-drive vehicles; transaxles feature a compact gear train that achieves six speeds using a single axis to produce a high torque of 400 Nm, and are as low cost, compact, and light as 4-speed automatic transaxles [1] The ...
A transmission control unit ( TCU ), also known as a transmission control module ( TCM ), or a gearbox control unit ( GCU ), is a type of automotive ECU that is used to control electronic automatic transmissions. Similar systems are used in conjunction with various semi-automatic transmissions, purely for clutch automation and actuation.
Gear shift lever on a motorcycle (above the toe of the rider's boot) A sequential manual transmission is unsynchronized, and allows the driver to select either the next gear (e.g. shifting from first gear to second gear) or the previous gear (e.g., shifting from third gear to second gear), operated either via electronic paddle-shifters mounted behind the steering wheel or with a sequential ...
Semi-automatic transmission. A semi-automatic transmission is a multiple-speed transmission where part of its operation is automated (typically the actuation of the clutch ), but the driver's input is still required to launch the vehicle from a standstill and to manually change gears. Semi-automatic transmissions were almost exclusively used in ...