Net Deals Web Search

  1. Ads

    related to: external hard drive adapter cable types

Search results

  1. Results From The WOW.Com Content Network
  2. Ribbon cable - Wikipedia

    en.wikipedia.org/wiki/Ribbon_cable

    A spacing of 0.05 inch (1.27 mm) is the most usual, allowing for a two-row connector with a pin spacing of 0.1 inch (2.54 mm). These types are used for many types of equipment, in particular for interconnections within an enclosure. For personal computers, this size was used in floppy-disk-drive cables and older or custom Parallel ATA cables.

  3. Docking station - Wikipedia

    en.wikipedia.org/wiki/Docking_station

    This type of dock provides some sort of hardware expansion for the device docked to it, such as an external storage drive, a GPU, or a liquid cooling radiator ...

  4. Network-attached storage - Wikipedia

    en.wikipedia.org/wiki/Network-attached_storage

    By 2021, three major types of NAS solutions are offered (all with hybrid cloud models where data can be stored both on-premise on the NAS and off site on a separate NAS or through a public cloud service provider). The first type of NAS is focused on consumer needs with lower-cost options that typically support 1–5 hot plug hard drives.

  5. Adapter (computing) - Wikipedia

    en.wikipedia.org/wiki/Adapter_(computing)

    Some adapters are built into devices, while the others can be installed on a computer's motherboard or connected as external devices. A Fibre Channel host bus adapter. A software component adapter is a type of software that is logically located between two software components and reconciles the differences between them.

  6. Expansion card - Wikipedia

    en.wikipedia.org/wiki/Expansion_card

    Example of a PCI digital I/O expansion card using a large square chip from PLX Technology to handle the PCI bus interface PCI expansion slot Altair 8800b from March 1976 with an 18-slot S-100 backplane which housed both the Intel 8080 mainboard and many expansion boards Rack of IBM Standard Modular System expansion cards in an IBM 1401 computer using a 16-pin gold plated edge connector first ...

  7. Floppy disk drive interface - Wikipedia

    en.wikipedia.org/wiki/Floppy_disk_drive_interface

    After IBM introduced the "twist" to floppy cables, and when both 5.25-inch and 3.5-inch drives were in common use, many cables had four connectors: one of each type before the twist, and one of each type after the twist. These cables still only supported two drives, one before and one after the twist, but they allowed using one cable for any ...

  1. Ads

    related to: external hard drive adapter cable types