Search results
Results From The WOW.Com Content Network
V6. 1960–1974 GMC V6. 1962–2009 Buick V6 (marketed as "Fireball V6", "3800", "Dauntless V6" in 1966-1971 Jeeps, and "Ecotec" in Holdens) 1977–2013 Chevrolet 90° V6 engine (derived from the Chevrolet Small-Block" V8; now marketed as GM Vortec V6 or Vortec 4300 or EcoTec3 V6) 1979–2010 Chevrolet 60-Degree V6.
Chevrolet V8 pattern. This was so named because it began with Chevrolet's V8 engines. Chevrolet big-block V8s. Chevrolet small-block V8s. GM Vortec 4300 90° V6. GM Iron Duke RWD inline 4 (early RWD Variants, later versions may use a FWD pattern, and have two possible starter locations) Jeep with GM Iron Duke inline 4 2.5L/151 in³ (1980-1983 ...
The 366 cu in (6.0 L) big-block V-8 gasoline engine was used in Chevrolet medium duty trucks and school buses. It had a bore and a stroke of 3.935 in × 3.76 in (99.9 mm × 95.5 mm). This engine was made from the 1960s until 2004.The 366 used 4 rings on the pistons, as it was designed from the very beginning as a truck engine.
The General Motors LS-based small-block engines are a family of V8 and V6 engines designed and manufactured by American automotive company General Motors.First introduced in 1997, the family is a continuation of the earlier first- and second-generation Chevrolet small-block engine, of which over 100 million have been produced altogether, and is also considered to be one of the most popular V8 ...
The Chevrolet small-block engine is a series of gasoline -powered V8 automobile engines, produced by the Chevrolet division of General Motors between 1954 and 2003, using the same basic engine block. Referred to as a "small-block" for its size relative to the physically much larger Chevrolet big-block engines, the small-block family spanned ...
GMC engines. GMC's own V8 was the 637-cubic-inch (10.4 L) unit, which was essentially a 478 V6 with two cylinders added. It shared the 5.125 in × 3.86 in (130.2 mm × 98.0 mm) bore and stroke and used a single camshaft. It was manufactured in gasoline and diesel versions, and was the largest-displacement production gasoline V8 ever made for ...
The General Motors 60° V6 engine family is a series of 60° V6 engines produced for both longitudinal and transverse applications. All of these engines are 12-valve cam-in-block or overhead valve engines, except for the LQ1 which uses 24 valves driven by dual overhead cams. These engines vary in displacement between 2.8 and 3.4 litres (2,837 ...
The High Value engine family from General Motors is a group of cam-in-block or overhead valve V6 engines.These engines feature cast iron blocks and aluminum heads, and use the same 60° vee bank as the 60° V6 family they are based on, but the new 99 mm (3.90 in) bore required offsetting the bores by 1.5 mm (0.059 in) away from the engine center line.