Search results
Results From The WOW.Com Content Network
Identification, friend or foe ( IFF) is a combat identification system designed for command and control. It uses a transponder that listens for an interrogation signal and then sends a response that identifies the broadcaster. IFF systems usually use radar frequencies, but other electromagnetic frequencies, radio or infrared, may be used. [ 1]
The aviation transponder interrogation modes are the standard formats of pulsed sequences from an interrogating Secondary Surveillance Radar (SSR) or similar Automatic Dependent Surveillance-Broadcast (ADS-B) system. The reply format is usually referred to as a "code" from a transponder, which is used to determine detailed information from a ...
There have been a number of modes used historically, but four are in common use today: mode 1, mode 2, mode 3/A, and mode C. Mode 1 is used to sort military targets during phases of a mission. Mode 2 is used to identify military aircraft missions. Mode 3/A is used to identify each aircraft in the radar's coverage area.
Distance measuring equipment. In aviation, distance measuring equipment ( DME) is a radio navigation technology that measures the slant range (distance) between an aircraft and a ground station by timing the propagation delay of radio signals in the frequency band between 960 and 1215 megahertz (MHz). Line-of-visibility between the aircraft and ...
IFF Mark X was the NATO standard military identification friend or foe transponder system from the early 1950s until it was slowly replaced by the IFF Mark XII in the 1970s. It was also adopted by ICAO, with some modifications, as the civilian air traffic control (ATC) secondary radar (SSR) transponder. The X in the name does not mean "tenth ...
Gillham code is a zero-padded 12-bit binary code using a parallel nine- [ 1] to eleven-wire interface, [ 2] the Gillham interface, that is used to transmit uncorrected barometric altitude between an encoding altimeter or analog air data computer and a digital transponder. It is a modified form of a Gray code and is sometimes referred to simply ...
Non-discrete mode A code reserved use in mode S radar/ADS-B environment where the aircraft identification will be used to correlate the flight plan instead of the mode A code. [1] US: Used exclusively by ADS-B aircraft to inhibit mode 3A transmission. [3] US: Non-discrete code assignments in accordance with FAA Order JO 7110.65, 5-2.
The corresponding logical symbols are "", "", [6] and , [10] and sometimes "iff".These are usually treated as equivalent. However, some texts of mathematical logic (particularly those on first-order logic, rather than propositional logic) make a distinction between these, in which the first, ↔, is used as a symbol in logic formulas, while ⇔ is used in reasoning about those logic formulas ...