Search results
Results From The WOW.Com Content Network
Damper winding. Bars and rings of the damper (amortisseur) winding of an AC generator (General Electric, early 20th century). Note the gaps in the cage along the quadrature axes. The damper winding (also amortisseur winding[1]) is a squirrel-cage -like winding on the rotor of a typical synchronous electric machine.
W. H. Allen, Sons & Company Ltd. The Company, initially known as W. H. Allen & Co was founded in 1880 by William Henry Allen as a manufacturer of centrifugal pumps and steam engines in York Street, Lambeth, London. [1][2] Electric light generating machinery followed with the support of Gisbert Kapp. The firm also supplied marine auxiliary ...
A Stockbridge damper is a tuned mass damper used to suppress wind-induced vibrations on slender structures such as overhead power lines, [1] long cantilevered signs [2] and cable-stayed bridges. The dumbbell -shaped device consists of two masses at the ends of a short length of cable or flexible rod, which is clamped at its middle to the main ...
Harmonic balancer lower pulley on a four-cylinder engine. A harmonic damper is a device fitted to the free (accessory drive) end of the crankshaft of an internal combustion engine to counter torsional and resonance vibrations from the crankshaft. This device must be an interference fit to the crankshaft in order to operate in an effective manner.
Damper (flow) Opposed blade dampers in a mixing duct. A damper is a valve or plate that stops or regulates the flow of air inside a duct, chimney, VAV box, air handler, or other air-handling equipment. A damper may be used to cut off central air conditioning (heating or cooling) to an unused room, or to regulate it for room-by-room temperature ...
generac.com. Generac Holdings Inc., commonly referred to as Generac (derived from a combination of generating and AC), is a Fortune 1000 American manufacturer of backup power generation products for residential, light commercial and industrial markets. [6] Generac's power systems range in output from 800 watts to 9 megawatts, [7] and are ...
Hairpin technology is a winding technology for stators in electric motors and generators and is also used for traction applications in electric vehicles. In contrast to conventional winding technologies, the hairpin technology is based on solid, flat copper bars which are inserted into the stator stack. These copper bars, also known as hairpins ...
September 25, 2024 at 11:49 PM. ALLEN PARK, Mich (FOX 2) - Dave Lovelock had quite the shock to the system last Friday in Allen Park. "I heard a pop in my kitchen that sounded like a .45 round and ...