Search results
Results From The WOW.Com Content Network
Most trucks had gasoline (G) engines until the early 1960s, when multifuel (M) and diesel (D) engines were introduced. Since then diesel fuel has increasingly been used, the last gasoline engine vehicles were built in 1985. Most engines have been water-cooled with inline (I) cylinders, but V types (V) and opposed (O) engines have also been used.
The first IHC "Highwheeler" truck had a very simple air-cooled horizontally opposed two-cylinder engine with a 5-inch (130 mm) stroke and a 5-inch (130 mm) bore, and produced around 18–20 hp (13–15 kW). Displacement was 196 cubic inches (3.2 L). [2] In 1915 a new L-head water-cooled 201 cubic inches (3.3 L) inline-four engine appeared. [3]
Wärtsilä-Sulzer RTA96-C. The Wärtsilä RT-flex96C is a two-stroke turbocharged low-speed diesel engine designed by the Finnish manufacturer Wärtsilä. It is designed for large container ships that run on heavy fuel oil. Its largest 14-cylinder version is 13.5 meters high, 26.59 meters long, weighs over 2,300 tonnes, and produces 80.08 ...
67–82 PS (49–60 kW; 66–81 bhp) ASE ( DIN) The Perkins 4.236 is a diesel engine manufactured by Perkins Engines. First produced in 1964,over 70,000 were produced in the first three years, and production increased to 60,000 units per annum. The engine was both innovative (using direct injection) and reliable, becoming a worldwide sales ...
A two-stroke diesel engine is a diesel engine that uses compression ignition in a two-stroke combustion cycle. It was invented by Hugo Güldner in 1899. [ 1] In compression ignition, air is first compressed and heated; fuel is then injected into the cylinder, causing it to self-ignite. This delivers a power stroke each time the piston rises and ...
The heat signature of the MTU diesel engine was much lower. [31] The fire control system and the sights of the Leopard 2 were considered to be better and the 120 mm (4.7 in) gun proved to be superior. [29] The projected production costs for one XM1 tank were US$728,000 in 1976, and the costs for one Leopard 2AV were US$56,000 higher. [29]
Damper (flow) Opposed blade dampers in a mixing duct. A damper is a valve or plate that stops or regulates the flow of air inside a duct, chimney, VAV box, air handler, or other air-handling equipment. A damper may be used to cut off central air conditioning (heating or cooling) to an unused room, or to regulate it for room-by-room temperature ...
A pneumatic motor ( air motor ), or compressed-air engine, is a type of motor which does mechanical work by expanding compressed air. Pneumatic motors generally convert the compressed-air energy to mechanical work through either linear or rotary motion. Linear motion can come from either a diaphragm or piston actuator, while rotary motion is ...