Ads
related to: coaxial cable adapter radio shack to go wirelessebay.com has been visited by 1M+ users in the past month
made-in-china.com has been visited by 100K+ users in the past month
Search results
Results From The WOW.Com Content Network
There was a time when RadioShack (RSH) mattered. If your dog chewed through your coaxial cable or your lithium oxide battery-powered watch stopped ticking, it was a short and easy drive to your ...
An RF connector ( radio frequency connector) is an electrical connector designed to work at radio frequencies in the multi-megahertz range. RF connectors are typically used with coaxial cables and are designed to maintain the shielding that the coaxial design offers. Better models also minimize the change in transmission line impedance at the ...
A double DIN 1.6/5.6 bulkhead jack connector, crimp type, for 75 Ω coaxial cable A Type N connector (male), right-angled solder-type for semi-rigid coaxial cable with a diameter of 0.141-inch. 4.1-9.5 connector, standardized as DIN 47231 (in 1974) and IEC 60169-11 (in 1977) 4.3-10 connector, formerly known as DIN 4.3/10, now standardized as ...
If a coil is made using coaxial cable near to the feed point of a balanced antenna, then the RF current that flows on the outer surface of the coaxial cable can be attenuated. One way of doing this would be to pass the cable through a ferrite toroid. The end result is exactly the same as a 1:1 current balun (or Guanella-type balun).
Passband. 0–11 GHz, often up to 18 GHz. Type N connector (female) The N connector (also, type-N connector) is a threaded, weatherproof, medium-size RF connector used to join coaxial cables. It was one of the first connectors capable of carrying microwave -frequency signals, and was invented in the 1940s by Paul Neill of Bell Labs, after whom ...
Cable. Coaxial. Passband. Typically 0–4 GHz. The BNC connector (initialism of "Bayonet Neill–Concelman") is a miniature quick connect/disconnect radio frequency connector used for coaxial cable. It is designed to maintain the same characteristic impedance of the cable, with 50 ohm and 75 ohm types being made. It is usually applied for video ...
Wi-Fi over Coax is a technology for extending and distributing Wi-Fi signals via coaxial cables. As an in-building wireless solution, Wi-Fi over Coax can make use of existing or new cabling with native impedance of 50 Ω shared by a Wi-Fi access point, cabling run, and antenna. Coaxial cables with characteristic impedance of 75 Ω, such as RG-6 ...
MMDS microwave dish. Multichannel multipoint distribution service ( MMDS ), formerly known as broadband radio service ( BRS) and also known as wireless cable, is a wireless telecommunications technology, used for general-purpose broadband networking or, more commonly, as an alternative method of cable television programming reception.
Ads
related to: coaxial cable adapter radio shack to go wirelessebay.com has been visited by 1M+ users in the past month
made-in-china.com has been visited by 100K+ users in the past month