Search results
Results From The WOW.Com Content Network
An electret microphone is a microphone whose diaphragm forms a capacitor (historically-termed a condenser) that incorporates an electret. The electret's permanent electric dipole provides a constant charge Q on the capacitor. Sound waves move the diaphragm, changing the capacitance C, which produces a corresponding voltage change across the ...
A wireless microphone, or cordless microphone, is a microphone without a physical cable connecting it directly to the sound recording or amplifying equipment with which it is associated. Also known as a radio microphone , it has a small, battery-powered radio transmitter in the microphone body, which transmits the audio signal from the ...
Main article: XLR connector. Most commonly used on professional microphones, the common 3-pin XLR connector is a standard for transferring balanced audio among professional audio equipment. The 4-pin XLR is the standard connector for intercom headsets, such as systems made by Clear-Com and Telex. Two pins are used for the mono headphone signal ...
These Basic Earbuds. The Work Earbuds Classic. Raycon. For everyday wear that’s easy to take in and out, these buds are the perfect pick! See it! Get The Work Earbuds Classic (originally $120 ...
A boundary microphone (or pressure zone microphone) is one or more small omnidirectional or cardioid condenser mic capsule (s) positioned near or flush with a boundary (surface) such as a floor, table, or wall. The capsule (s) are typically mounted in a flat plate or housing. The arrangement provides a directional half-space pickup pattern ...
Calibration using pistonphones and sound calibrators. A pistonphone is an acoustical calibrator (sound source) that uses a closed coupling volume to generate a precise sound pressure for the calibration of measurement microphones. The principle relies on a piston mechanically driven to move at a specified cyclic rate, pushing on a fixed volume ...
Phantom power, in the context of professional audio equipment, is DC electric power equally applied to both signal wires in balanced microphone cables, forming a phantom circuit, to operate microphones that contain active electronic circuitry. [1] It is best known as a convenient power source for condenser microphones, though many active direct ...
In a noisy environment, both microphones receive noise at a similar level, but the primary mic receives the desired sounds more strongly. Thus if one signal is subtracted from the other (in the simplest sense, by connecting the microphones out of phase) much of the noise is canceled while the desired sound is retained.