Ad
related to: automatic damper control system for generator
Search results
Results From The WOW.Com Content Network
An electrical grid may have many types of generators and loads; generators must be controlled to maintain stable operation of the system. In an electric power system, automatic generation control (AGC) is a system for adjusting the power output of multiple generators at different power plants, in response to changes in the load. Since a power ...
Damper winding. Bars and rings of the damper (amortisseur) winding of an AC generator (General Electric, early 20th century). Note the gaps in the cage along the quadrature axes. The damper winding (also amortisseur winding[1]) is a squirrel-cage -like winding on the rotor of a typical synchronous electric machine.
Speed Dependent Damping Control. Speed Dependent Damping Control (also called SD²C) was an automatic damper system installed on late-1980s and early-1990s Cadillac automobiles. This system firmed up the suspension at 25 mph (40 km/h) and again at 60 mph (97 km/h). The firmest setting was also used when starting from a standstill until 5 mph (8 ...
A Ward Leonard Control system with generator and motor connected directly. The speed of a DC motor is controlled by varying the voltage fed to the generator field windings, V gf, which varies the output voltage of the generator. The varied output voltage will change the voltage of the motor, since they are connected directly through the armature.
Proportional–integral–derivative controller. A proportional–integral–derivative controller (PID controller or three-term controller) is a control loop mechanism employing feedback that is widely used in industrial control systems and a variety of other applications requiring continuously modulated control.
Droop speed control. Droop speed control is a control mode used for AC electrical power generators, whereby the power output of a generator reduces as the line frequency increases. It is commonly used as the speed control mode of the governor of a prime mover driving a synchronous generator connected to an electrical grid.
Actuator. An actuator is a component of a machine that produces force, torque, or displacement, usually in a controlled way, when an electrical, pneumatic or hydraulic input is supplied to it in a system (called an actuating system). [1] An actuator converts such an input signal into the required form of mechanical energy.
In an alternating current (AC) electric power system, synchronization is the process of matching the frequency, phase and voltage of a generator or other source to an electrical grid in order to transfer power. If two unconnected segments of a grid are to be connected to each other, they cannot safely exchange AC power until they are synchronized.
Ad
related to: automatic damper control system for generator