Search results
Results From The WOW.Com Content Network
It is heated at the left, e.g., by a propane flame and heat is released to ambient temperature by a heat exchanger. If the temperature at the left side is high enough, the system starts to produces a loud sound. Thermoacoustic engines still suffer from some limitations, including that: The device usually has low power-to-volume ratio.
An operating temperature is the allowable temperature range of the local ambient environment at which an electrical or mechanical device operates. The device will operate effectively within a specified temperature range which varies based on the device function and application context, and ranges from the minimum operating temperature to the maximum operating temperature (or peak operating ...
The small signal parameters are: – Resonance frequency of driver. – Driver at considering electrical resistance only. – Driver at considering driver nonelectrical losses only. – Total driver at resulting from all driver resistances. – Volume of air having the same acoustic compliance as driver suspension.
Loudspeaker. The hole below the lowest woofer is a port for a bass reflex system. A loudspeaker (commonly referred to as a speaker or speaker driver) is an electroacoustic transducer [ 1]: 597 that converts an electrical audio signal into a corresponding sound. [ 2] A speaker system, also often simply referred to as a speaker or loudspeaker ...
Electrostatic loudspeaker. Schematic showing an electrostatic speaker's construction and its connections. The thickness of the diaphragm and grids has been exaggerated for the purpose of illustration. An electrostatic loudspeaker (ESL) is a loudspeaker design in which sound is generated by the force exerted on a membrane suspended in an ...
In electronics, noise is an unwanted disturbance in an electrical signal. [ 1]: 5. Noise generated by electronic devices varies greatly as it is produced by several different effects. In particular, noise is inherent in physics and central to thermodynamics. Any conductor with electrical resistance will generate thermal noise inherently.
High-temperature operating life (HTOL) is a reliability test applied to integrated circuits (ICs) to determine their intrinsic reliability. This test stresses the IC at an elevated temperature, high voltage and dynamic operation for a predefined period of time. The IC is usually monitored under stress and tested at intermediate intervals.
The braking effect is critical to speaker design, in that designers leverage it to ensure the speaker stops making sound quickly and that the coil is in position to reproduce the next sound. The electrical signal generated by the coil travels back along the speaker cable to the amplifier.