Search results
Results From The WOW.Com Content Network
It is heated at the left, e.g., by a propane flame and heat is released to ambient temperature by a heat exchanger. If the temperature at the left side is high enough, the system starts to produces a loud sound. Thermoacoustic engines still suffer from some limitations, including that: The device usually has low power-to-volume ratio.
The small signal parameters are: – Resonance frequency of driver. – Driver at considering electrical resistance only. – Driver at considering driver nonelectrical losses only. – Total driver at resulting from all driver resistances. – Volume of air having the same acoustic compliance as driver suspension.
Audio power. Audio power is the electrical power transferred from an audio amplifier to a loudspeaker, measured in watts. The electrical power delivered to the loudspeaker, together with its efficiency, determines the sound power generated (with the rest of the electrical power being converted to heat). Amplifiers are limited in the electrical ...
An operating temperature is the allowable temperature range of the local ambient environment at which an electrical or mechanical device operates. The device will operate effectively within a specified temperature range which varies based on the device function and application context, and ranges from the minimum operating temperature to the maximum operating temperature (or peak operating ...
The effects of this can vary. If one digital device is used to monitor another digital device, this will cause dropouts or distortion in the audio, as one device will be producing more or less data than the other per unit time. If two independent devices record at the same time, one will lag the other more and more over time.
In electronics, noise is an unwanted disturbance in an electrical signal. [ 1]: 5. Noise generated by electronic devices varies greatly as it is produced by several different effects. In particular, noise is inherent in physics and central to thermodynamics. Any conductor with electrical resistance will generate thermal noise inherently.
Loudspeaker. The hole below the lowest woofer is a port for a bass reflex system. A loudspeaker (commonly referred to as a speaker or speaker driver) is an electroacoustic transducer [ 1]: 597 that converts an electrical audio signal into a corresponding sound. [ 2] A speaker system, also often simply referred to as a speaker or loudspeaker ...
High-temperature operating life (HTOL) is a reliability test applied to integrated circuits (ICs) to determine their intrinsic reliability. This test stresses the IC at an elevated temperature, high voltage and dynamic operation for a predefined period of time. The IC is usually monitored under stress and tested at intermediate intervals.