Search results
Results From The WOW.Com Content Network
The Ram 1500 with EcoDiesel was the first half-ton pickup with a diesel engine available in the U.S since Dodge had previously offered a six-cylinder Mitsubishi diesel in its half-ton pickup for 1978, and GM offered diesel engines from 1978 to 1998. [10] Other diesel pickup trucks that have been available for decades are heavier-duty trucks ...
6.2L fitted to a 1987 HMMWV. The original 6.2 L (379 cu in) diesel V8 was introduced in 1982 for the Chevrolet C/K and was produced until 1993. The 6.2L diesel emerged as a high-fuel-economy alternative to the V8 gasoline engine lineup, and achieved better mileage than Chevrolet's 4.3L V6 gasoline engine of the 1980s, at a time when the market was focused on power rather than efficiency.
Larger trucks came with V8s only. Beginning with the 1962 7E models, a 130 hp (97 kW) 212 cu in (3.5 L) Detroit Diesel engine was also available in those of 1-ton or above capacity, and air brakes could be had on 2-ton models. A "96BBC" (meaning 96 inches from bumper to back of cab) was available in both gasoline- and diesel-powered models ...
The International Harvester Company (IHC) has been building its own proprietary truck engines since the introduction of their first truck in 1907. International tended to use proprietary diesel engines. In the 1970s, IHC built the DVT 573 V-8 diesel of 240 and 260 hp (179 and 194 kW) but these were not highly regarded and relatively few were sold.
Damper (flow) Opposed blade dampers in a mixing duct. A damper is a valve or plate that stops or regulates the flow of air inside a duct, chimney, VAV box, air handler, or other air-handling equipment. A damper may be used to cut off central air conditioning (heating or cooling) to an unused room, or to regulate it for room-by-room temperature ...
The -ton, 4×4, Kaiser Jeep M715, sometimes called the "Five quarter (ton)", for its (or ) ton payload rating, is an American light military truck, based on the civilian Jeep Gladiator (SJ). Design and development for the M715 began in 1965, intended to replace the Dodge M37. In a departure from its purpose-built predecessor, the M715 was the ...
Chevrolet C/K (fourth generation) (GMT400) The third generation of the C/K series is a range of trucks that was manufactured by General Motors from the 1973 to 1991 model years. [ 2] Serving as the replacement for the "Action Line" C/K trucks, GM designated the generation under "Rounded Line" moniker. [ 3] Again offered as a two-door pickup ...
The 4M50 is a series of 4-cylinder diesel engines with 4899 cc, bore × stroke 114 × 120mm, gear driven, DOHC 4 valves per cylinder, and common rail direct injection with turbocharging and intercooler. [ 6] 4M50-T3 – 103 kW, 412 Nm. 02/2004- Mitsubishi Fuso Canter. 4M50-4AT4 – 110 kW at 2700 rpm, 441 Nm at 1600 rpm.