Search results
Results From The WOW.Com Content Network
[1] The Charrière is measured by the ''outer'' diameter, and is defined as 1 Fr = 1/3 mm, and thus 1 mm = 3 Fr; therefore the diameter of a round catheter in millimetres can be determined by dividing the French size by 3. [2] The French units roughly correspond to the outer circumference of the catheter (see table below).
In digital photography, the image sensor format is the shape and size of the image sensor . The image sensor format of a digital camera determines the angle of view of a particular lens when used with a particular sensor. Because the image sensors in many digital cameras are smaller than the 24 mm × 36 mm image area of full-frame 35 mm cameras ...
1:7: 43.54 mm Common scale utilized by Japanese companies for figures of anime characters, especially [citation needed] when the portrayed character is supposed to be young in age. The scale of a standard 4-stud × 2-stud Lego brick compared to the unit size of a standard house brick (9 × 4 + 1 ⁄ 2 × 3 inches). 1:6: 2 in: 50.80 mm
However, the 3 + 1 ⁄ 2-inch (89 mm) 12-gauge shell, with its higher SAAMI pressure rating of 14,000 psi (97 MPa) compared to standard 2 + 3 ⁄ 4-inch (70 mm) and 3-inch (76 mm) 12-gauge shells with their lower pressure rating of 11,500 psi (79 MPa), began to approach the performance of the 3 + 1 ⁄ 2-inch (89 mm) 10-gauge shells with a ...
12 ft. Metric ( SI) units. 25.4 mm. A fire hydrant marked as 3-inch. The inch (symbol: in or ″) is a unit of length in the British Imperial and the United States customary systems of measurement. It is equal to 1 36 yard or 1 12 of a foot. Derived from the Roman uncia ("twelfth"), the word inch is also sometimes used to ...
As well as 1 ⁄ 4 in (6.4 mm) tape, studio and multitrack machines use tape widths of 1 ⁄ 2, 1, and 2 inches (12.7, 25.4, and 50.8 mm), and at least one 3 inches (76.2 mm) [citation needed] machine was available for a time. There is also a 35 mm width, but this variety is more similar to the motion picture stock of the same width. It is ...
The optical format is approximately the diagonal length of the sensor multiplied by 3/2. The result is expressed in inches and is usually (but not always) rounded to a convenient fraction. For instance, a 6.4x4.8 mm sensor has a diagonal of 8.0 mm and therefore an optical format of 8.0*3/2 = 12 mm, which is expressed as inch in imperial units.
Cellos exist in a smaller range of sizes than violins, with 4/4, 3/4, 1/2, 1/4, 1/8, and 1/10 being reasonably common. As with the violin, the Stradivarius scale is regarded as standard for orchestral work; This is about 27.4 inches (700 mm). Violas are commonly described in terms of their body length rather than by a fraction. There are two ...