Search results
Results From The WOW.Com Content Network
In digital photography, the image sensor format is the shape and size of the image sensor . The image sensor format of a digital camera determines the angle of view of a particular lens when used with a particular sensor. Because the image sensors in many digital cameras are smaller than the 24 mm × 36 mm image area of full-frame 35 mm cameras ...
However, the 3 + 1 ⁄ 2-inch (89 mm) 12-gauge shell, with its higher SAAMI pressure rating of 14,000 psi (97 MPa) compared to standard 2 + 3 ⁄ 4-inch (70 mm) and 3-inch (76 mm) 12-gauge shells with their lower pressure rating of 11,500 psi (79 MPa), began to approach the performance of the 3 + 1 ⁄ 2-inch (89 mm) 10-gauge shells with a ...
8-, 5.25-, 3.5-, 2.5-, 1.8- and 1-inch HDDs, together with a ruler to show the length of platters and read-write heads A newer 2.5-inch (63.5 mm) 6,495 MB HDD compared to an older 5.25-inch full-height 110 MB HDD. IBM's first hard drive, the IBM 350, used a stack of fifty 24-inch platters and was of a size comparable to two large refrigerators.
The first floppy disks, invented and made by IBM in 1971, [3] had a disk diameter of 8 inches (203.2 mm). [4] Subsequently, the 5¼-inch (133.35 mm) and then the 3½-inch (88.9 mm) became a ubiquitous form of data storage and transfer into the first years of the 21st century.
3 1 ⁄ 2 inch SHARP CE-1600F, CE-140F: 2 1 ⁄ 2 inch [2] [3] Single drive: 1, diskette: 2 16 8 512 2× 64 kB 270 GCR (4/5) Internally based on FDU-250 Micro Floppy Disk Drive Unit [2] Thomson: 5 1 ⁄ 4 inch Single 1 40 16 128 80 kB 300 FM Thomson UD90.070 Double 2 256 320 kB MFM Thomson DD90-320 [NB 17] 3 1 ⁄ 2 inch Double 1 80 16 256 320 ...
The microwave is between 1 meter to 1 millimeter. The millimetre ( international spelling; SI unit symbol mm) or millimeter ( American spelling) is a unit of length in the International System of Units (SI), equal to one thousandth of a metre, which is the SI base unit of length. Therefore, there are one thousand millimetres in a metre.
In the United States, Canada, and Mexico, ring sizes are specified using a numerical scale with 1⁄4 steps, where whole sizes differ by 0.032 inches (0.81 mm) of internal diameter, equivalent to 0.1005 inches (2.55 mm) of internal circumference. The relationship of this size ( ) to ISO 8653:2016 circumference ( ) is , while the relationship to ...
Lozenge; diamond shape, 1 ⁄ 2 by 1 ⁄ 2 by 1 ⁄ 8 inch (10 mm × 10 mm × 3 mm) Fermière; cut lengthwise and then sliced to desired thickness 1 ⁄ 8 – 1 ⁄ 2 inch (3–10 mm) Rondelle; cylindrical vegetables cut to discs of desired thickness 1 ⁄ 8 – 1 ⁄ 2 inch (3–10 mm) Tourné; 2 inches (50 mm) long with seven faces usually ...