Net Deals Web Search

Search results

1. Results From The WOW.Com Content Network

2. Float voltage - Wikipedia

   en.wikipedia.org/wiki/Float_voltage

   Float voltage is the voltage at which a battery is maintained after being fully charged to maintain that capacity by compensating for self-discharge of the battery. The voltage could be held constant for the entire duration of the cell's operation (such as in an automotive battery) or could be held for a particular phase of charging by the charger.

3. Electric vehicle battery - Wikipedia

   en.wikipedia.org/wiki/Electric_vehicle_battery

   An electric vehicle battery is a rechargeable battery used to power the electric motors of a battery electric vehicle (BEV) or hybrid electric vehicle (HEV). They are typically lithium-ion batteries that are designed for high power-to-weight ratio and energy density. Compared to liquid fuels, most current battery technologies have much lower ...

4. Electric car charging methods - Wikipedia

   en.wikipedia.org/wiki/Electric_car_charging_methods

   Constant voltage. Constant voltage charging is a widely used charging method involving constant voltage between the battery poles. The starter battery uses constant voltage charging when the vehicle is running. If the specified voltage constant value is appropriate, it can ensure that the battery is fully charged, while also minimizing gas and ...

5. Uninterruptible power supply - Wikipedia

   en.wikipedia.org/wiki/Uninterruptible_power_supply

   If a battery has been completely discharged (e.g. the car lights were left on overnight) and next is given a fast charge for only a few minutes, then during the short charging time it develops only a charge near the interface. The battery voltage may rise to be close to the charger voltage so that the charging current decreases significantly.

6. SAE J1772 - Wikipedia

   en.wikipedia.org/wiki/SAE_J1772

   SAE J1772, also known as a J plug or Type 1 connector after its international standard, IEC 62196 Type 1, is a North American standard for electrical connectors for electric vehicles maintained by SAE International under the formal title "SAE Surface Vehicle Recommended Practice J1772, SAE Electric Vehicle Conductive Charge Coupler". [1]

7. Charging station - Wikipedia

   en.wikipedia.org/wiki/Charging_station

   A charging station, also known as a charge point, chargepoint, or electric vehicle supply equipment ( EVSE ), is a power supply device that supplies electrical power for recharging plug-in electric vehicles (including battery electric vehicles, electric trucks, electric buses, neighborhood electric vehicles, and plug-in hybrid vehicles ).

8. Combined Charging System - Wikipedia

   en.wikipedia.org/wiki/Combined_Charging_System

   The Combined Charging System ( CCS) is a standard for charging electric vehicles. It can use Combo 1 ( CCS1) or Combo 2 ( CCS2) connectors to provide power at up to 350 kilowatts (kW) (max 500 A). [1] These two connectors are extensions of the IEC 62196 Type 1 and Type 2 connectors, with two additional direct current (DC) contacts to allow high ...

9. Megawatt Charging System - Wikipedia

   en.wikipedia.org/wiki/Megawatt_Charging_System

   ISO 15118 -20. The Megawatt Charging System ( MCS) is a charging connector under development for large battery electric vehicles. The connector will be rated for charging at a maximum rate of 3.75 megawatts (3,000 amps at 1,250 volts direct current (DC)). The MCS connector is being advanced by the CharIN organization, with aspirations that it ...